Acura MDX Paint correction/Gtechniq coating

Pureshine

Pureshine

New member
Joined
Dec 30, 2012
Messages
4,774
Reaction score
0
I had this customer contact me to do paint correction on the MDX and Gtechniq C1 and EXO. They had to drive 40 miles and take a ferry to drop off the car. The paint was really bad and had been driven through car washes. Total time with the coatings was 3 days. There are no pictures of the wash or final pictures out side was raining pretty bad.

Sonax wheel cleaner
Wheel Woolies/assorted brushes
Meg's APC+
Foam wash
2 bucket wash
Meg's Microfiber wash mitt
Nanoskin wash mitt fine grade
ONR for lube
Master blaster to dry car

Griot's 5"
PC with 4" pads
Uber yellow/orange pads
Meg's 105/205
Menz Top Inspection
Gtechniq prep spray
Gtechniq C1 1 coat
Gtechniq EXO 2 coats












 
Excellent job!!! I enjoy looking at your work / posts , and respect your work as a detailer.
 
Great correction looks better than new brother!!!!
 
fry said:
Excellent job!!! I enjoy looking at your work / posts , and respect your work as a detailer.
Click to expand...
Thank you very much I appreciate that alot :)
pikiki said:
Great correction looks better than new brother!!!!
Click to expand...
Thank you! There are bringing me their black Toyota truck on the 4th for the same thing.
 
Great work!! I am really wanting to adding some Gtechniq to my arsenal. I am a sucker for depth and gloss.
 
530inv said:
Great work!! I am really wanting to adding some Gtechniq to my arsenal. I am a sucker for depth and gloss.
Click to expand...

The only reason I used it was cause they bought it. I'm not a fan of putting on all the coats. This is why I like opti-coat.
 
530inv said:
Got ya! I was stuck between those two products.
Click to expand...

Its a good product but if you use C1 and EXO you need one coat of C1 and wait 6-8hrs till you can apply EXO then wait 20-30 mins between coats of EXO. EXO you need to apply in a smaller area than C1.
 
Pureshine said:
Its a good product but if you use C1 and EXO you need one coat of C1 and wait 6-8hrs till you can apply EXO then wait 20-30 mins between coats of EXO. EXO you need to apply in a smaller area than C1.
Click to expand...

I was actually thinking of cquartz finest euro and opti-coat. I think I am leaning more towards opti-coat after some more research I did last night.
 
Pureshine said:
The only reason I used it was cause they bought it. I'm not a fan of putting on all the coats. This is why I like opti-coat.
Click to expand...

Im a fan of correcting, then wipe down with v7 and then wiping that off and adding collinite 845 or 476. Simple and effective
 
You must log in or register to reply here.
Back
Top