Advice on 2010 Jeep Wrangler Paint Correction

I like the Menz. on the Jeep. Like mentioned before it's advisable to remove as much plastic as you can/want depending on your correcting aspirations. I owned a Wrangler for many years, in fact the front roll bar saved my life 6 months ago. It ain't easy but it can be done. Good luck & take care. :buffing:

Peace,

Darrin
 
Thanks and since it's a freebie I'm thinking of telling my buddy to buy me the 3" polisher because lord know I will need it for his Jeep
 
Get lots of tape to tape everything off, be patient. I used LC hybrid pad the orange and white 5". I also used Wolfgang Uber Compound and Finishing Glaze. Then coated it with Ceramic Pro 9H
 
Well I ordered the Griot 3" polisher, SF4000 and FG400 today. Hopefully I have it by Friday so I can get on this Wrangler this weekend
 
Well I got started on the Wrangler today. Washed it, cleaned the engine, clayed it, and taped it off. Spent about 90 minutes just taping everything off, pulled the mirrors off, spare tire off, and wiper arms. Did a 20" x 20" test area and the FG400/SF4000 combo seamed to give me best results in my test area using LC flat orange pad with the FG400 and LC flat white pad with the SF4000. So that's how I will attack it tomorrow.
 
You must log in or register to reply here.
Back
Top