Americana 3000 or 3d 505 1 step polish before coating

mvp90805

mvp90805

New member
Joined
Sep 3, 2015
Messages
5
Reaction score
0
hello everyone!

im planning on putting a coating on my mustang tomorrow

it has light swirl marks thinking of doing a one step polish but wondering which should i use for the polish before the IPA and coating

the [FONT=&quot]Americana IAT3000 or the 3D 505 AAT CORECTION GLAZE[/FONT][h=1][/h]
thanks in advance for the help =D
 
The good old test spot will be your answer.
 
I would advise against using any cleaner wax, (like 505) type product before coating.

Maybe check out 3D One, or ACA 520 from their line.
 
thank you , figured that would be the case
 
same here.. that was suggested to me by a detail shop but then i notice the glaze part aka fillers then i went to another shop and they suggested americana cuz after the ipa the swirl marks gonna show up again after the oil/ fillers r taken off if i recall
 
dlc95 said:
I would advise against using any cleaner wax, (like 505) type product before coating.

Maybe check out 3D One, or ACA 520 from their line.
Click to expand...

Good call. I forgot 505 is an AIO.
 
Oz_TCH said:
Can you please explain why ? I just wanted to be educated as to why. Thx.
Click to expand...

Sure!

Coatings often require bare paint, or a designated, specialized primer polish before application.

Products like 505 utilize some type of wax and/or sealant for protection. These products create more work with removal than typical polishing oils. Using a cleaner wax works against efficient work flow, when applying a coating.

CarPro Essence, or Geyon Primer are exceptions to their product line.
 
You must log in or register to reply here.
Back
Top