Base for Wolfgang Fuzion

K

Krisek

New member
Joined
Feb 19, 2009
Messages
10
Reaction score
0
Can I use any of this as Base for Wolfgang Fuzion ( Wolfgang Recommends there Glaze but I'm not going to pay for shipping again just for glaze ... so I rather pickup something from Local store Meg? or maybe some mother's ?.. )

Mothers® Sealer And Glaze
Mothers Carnuba
Meg. NXT v1
PoorBoys EXP
PoorBoys White Diamond
Optimum Spray Wax
Coolnite 476 ...
Farecla Glaze
Farecla Wax


Car will be preped this way ..

Wash
Clay
Yellow Pad Lake with PB SSR 2.5
White Pad Sonus SFX with SSR 1

Base ?????

Fuzion x 2 6hr between layers ...

Buffed with Bonet using PC.

any better ideas

PS, Car is Light Titanium Gray....
 
I would use the PB EXP as the base. The others I think all have Caranuba in them so I would use the EXP x2 say 12 hours apart and then hit it with two coats of fusion.
I use Wolfgang DGPS as my base after using the PB SSR1 and then top with Fusion.

Wax007.jpg
 
Yeah that's what I was going for ....

EXP or
White Diamond - they recommend to use it before sealants ... ( So i Don't think that it contains any carnuba

So EXP vs White Diamond

or maybe White Diamond >> EXP >> Fuzion in that order
 
I have never used the White Diamond, It contains fillers so if there is some swirls that need a filler to hide I would say you could use it. then the EXP x 2 then the Fusion x 2. I have used the EXP under the Fusion before and it does look good I just prefer the Wolfgang Deep Gloss Paint Sealant over the EXP, I think the DGPS is slicker. I do like the PB SSR 1 and 2.5 however. They are good products
 
I would just use 2 coats of fuzion and that's it.
 
Pfft, Poorboy's SSR2.5 & Orange should take care of pretty much anything and everything. Then go SSR1 & White, then do EX-P and finally Fuzion. Or instead of EX-P go White Diamand Glaze and then Fuzion.
 
wash, clay, polish, danase wet glaze, fuzion
 
I would use a pure sealant under Fuzion ... something like Wolfgang or Four Star as possible.
 
skip the nxt...

SSR 2.5 orange
SSR 2 white
XMT #1 grey (some may suggest blue?)
Sealant
Sealant (for even coverage)
Fuzion
 
loudog2 said:
I would just use 2 coats of fuzion and that's it.
Click to expand...

Me, too. :cheers:

If I buy an expensive wax, then that is what I want to see. Fuzion doesn't need a base coat. Experience Fuzion in its purity! :)
 
SSR 2.5 orange lake
SSR 2 white sonus SFX
XMT #1 blue sonus SFX
EX-P
Fuzion
 
Krisek said:
Yellow Pad Lake with PB SSR 2.5
White Pad Sonus SFX with SSR 1
Click to expand...

Krisek said:
SSR 2.5 orange lake
SSR 2 white sonus SFX
XMT #1 blue sonus SFX
EX-P
Fuzion
Click to expand...

You are all over the place here. Like I told you on Topia, orange w/SSR 2.5 then white w/SSR 1. Do a wipe down and apply Fuzion to clean paint. It doesn't need a "base".

If you stick with the second quote, you can skip the SSR 2. It's not needed. Just go to SSR 1 on a white pad.
 
Last edited:
You must log in or register to reply here.
Back
Top