Beautify Senario

B

BILL

New member
Joined
Apr 23, 2006
Messages
2,955
Reaction score
0
My Senario....

Clay......pinn Clay

Swirl Remover.....pinn A S.R...Orange Pad

Mothers Pre-wax Cleaner.......White Pad

Dp 555 Finishing Polish .......... White Pad

Megs #7 Glaze.............Grey Pad

Upp Sealer..................Blue Pad.......M.F. Towel

Soveran Paste............by Hand........M.F. Towel...Final Buff M.f Bonnet Over A Lambs Wool Bonnet.......


Please Fix If Needs Fixing..........;)
 
Last edited by a moderator:
You shouldn't apply a sealant over the glaze. The Glaze can be skipped.
 
Only thing I would change is putting WG under that Souveran! But heck thats just my opinion. :o
 
I get rid of the paint cleaner and the glaze, unnecessary steps in your equation.
 
killrwheels@autogeek said:
I get rid of the paint cleaner and the glaze, unnecessary steps in your equation.
Click to expand...


hows this......

Clay......pinn Clay

Swirl Remover.....pinn A S.R...Orange Pad

Dp 555 Finishing Polish .......... White Pad

Upp Sealer..................Blue Pad.......M.F. Towel

Soveran Paste............by Hand........M.F. Towel...Final Buff M.f Bonnet Over A Lambs Wool Bonnet.......


Please Fix AGAIN If Needs Fixing..........;)
 
Last edited:
DS Detailer said:
You shouldn't apply a sealant over the glaze. The Glaze can be skipped.
Click to expand...
I read this over and over,but WG sells a a glaze with there kit.is the glaze made to work with WG's line of products?

Sense we don't leave our paint go long enough without redoing it then i can't see durability being an issue unless its your last detail before the winter sets in..
 
most sealants dont adhere and cure well against glazes, but remember in detailing some terms are used quite widely. The finishing glaze from WG is more of a final polish with some sealant friendly brighters, versus a Megs 7 pure glaze for instances.
 
I know we can top sealants with wax but can you top a sealant with a glaze?
I don't think i've seen this question ask before.

Killer ,i really like looks the of glazes WG being one them ,the other i used was mothers glaze & sealant i was told and needed something high in fillers at the time.
 
DS Detailer said:
You shouldn't apply a sealant over the glaze. The Glaze can be skipped.
Click to expand...

Why do think that, I use pinn xmt glaze under ls and it made for a very wet and shinny finish, I'm not trying to question your technique, I was just wondering maybe you know something I don't.
 
If the sealant has cured, you certainly could go to a glaze and then onto a wax as desired. Becareful that the glaze (like Moose Glazes) have NO abrasive ability or your likely just removing your sealant. I dont see to many waxes these days that truly need a glaze to amp up their wetness, but thats a personal observation.

I do know several individuals that show their cars, and some like to use a sealant for durability and then add a pure glaze before the show. When they wash the car off that evening or next morning it removes all the glaze since no protection was added after. When I get them to commit to Souveran Paste, they usually admit that it does exactly what they are looking for and like that it offers some additional UV protection. So we replace the glaze with Souveran or even offer some to just add Crystal Mist over the sealant to get some carnauba glow.
 
Excessive Detail said:
Why do think that, I use pinn xmt glaze under ls and it made for a very wet and shinny finish, I'm not trying to question your technique, I was just wondering maybe you know something I don't.
Click to expand...


You use XMT glaze under which sealer?? which one??
 
Excessive Detail said:
klasse and or pinn ls or wolgang
Click to expand...


According to what i read yesterday you can also apply glaze over cured sealer then wax .
 
Ya knwo, Bill and I keep going back to the glaze/sealer yes/no thing. The more I think about it, I would assume the best way would be to get your sealer on and wait maybe two days, then laye ron the glaze?
 
scooterguitar said:
Ya knwo, Bill and I keep going back to the glaze/sealer yes/no thing. The more I think about it, I would assume the best way would be to get your sealer on and wait maybe two days, then laye ron the glaze?
Click to expand...



exactly MY PLAN...............THEN TOP WITH SOVERAN..and maybe mothers reflections top coat to help with the durability.......:cheers:
 
BILL said:
hows this......

Clay......pinn Clay

Swirl Remover.....pinn A S.R...Orange Pad

Dp 555 Finishing Polish .......... White Pad

Upp Sealer..................Blue Pad.......M.F. Towel

Soveran Paste............by Hand........M.F. Towel...Final Buff M.f Bonnet Over A Lambs Wool Bonnet.......


Please Fix AGAIN If Needs Fixing..........;)
Click to expand...


i will use this selection, dont know if this is the best, but its what i have!:D
what about using AIO between finishing polish and sealer?
 
Moises_C said:
i will use this selection, dont know if this is the best, but its what i have!:D
what about using AIO between finishing polish and sealer?
Click to expand...


YES, I posted that today somewhere.:cheers:
 
Moises_C said:
really??
huhhmmm
:cheers: have to read more
Click to expand...



I thought the AIO would be good just before the sealer ........
 
You must log in or register to reply here.
Back
Top