before and after

Wow!!! Great job - looking forward to seeing the rest of the photos.
 
Wow! Looks great!

Sent from my Desire HD using AG Online
 
Ok guys, Haven't really had much time to edit and cull through photos or do a real write up.

Products and equipment used:

Duragloss 541 cleaner/mildew buster
Pressure Pro Clearly Pink (hydro sulfuric acid diluted 20:1 for rust stain removal)
Marine 31 Gel Coat heavy cut (Makita rotary machine with 3M wool pad)
Rejex
Wolfgang Deep Gloss Paint Sealant 3.0
Pinnacle XMT 360
An assortment of Lake Country 5" and 4" pads
Acetone to remove dead/ oxidized vinyl from seat cushions
Acetone to repair dash (I discovered that on badly cracked/deteriorated rubber dash acetone and a microfiber can be used to "MELT" the rubber into the cracks)
Acetone to remove pine tree sap
303 Aerospace Protectant
303 Fabric Guard
Wolfgang Exterior Trim sealant on rub rails and bright work
A hand rake to remove pine straw and magnolia leaves before vacuuming. (had to vacuum 3 times to get carpet clean)
 
Incredible, probably just increased the value of that boat by 500%
 
I am here to say acetone isnt good for seats its the last thing to use.
acetone can take the color wright off the seat.
But if the seat is real bad and you have tryed everything else try it.ps will make the seats hard and start to split apart.
try softscrub with bleach and a scrub bruch.always wet the seat frist to get the treds wet bleach and acetone will eat them away fast when done wash with water for 4 or 5 mins .
 
I agree you defiantly upped the value of that boat.
Great job!
 
Nice work! Could you share if you used 303 on the entire fiberglass exterior? I use it for my dash, interior car areas. I'm curious what you used it for on the boat.
 
Gokite said:
Nice work! Could you share if you used 303 on the entire fiberglass exterior? I use it for my dash, interior car areas. I'm curious what you used it for on the boat.
Click to expand...
only used 303 on the vinyl
 
master detailer said:
I am here to say acetone isnt good for seats its the last thing to use.
acetone can take the color wright off the seat.
But if the seat is real bad and you have tryed everything else try it.ps will make the seats hard and start to split apart.
try softscrub with bleach and a scrub bruch.always wet the seat frist to get the treds wet bleach and acetone will eat them away fast when done wash with water for 4 or 5 mins .
Click to expand...
Thanks Master. Yes, the seats were toast. I wasn't worried about long term since my client will replace them soon. Get it looking good for the summer is all he wanted as far as the seats were concerned.
 
That is amazing! I wasn't sure if that was the same boat at first. Wow.

That picture will earn you sooooo much money if you decide to use it in your advertising.

Great job.
 
Wow amazing work. I didn't even think a boat in that condition could make that big of a turn around. Great work

Sent from my HTC6435LVW using AG Online
 
You must log in or register to reply here.
Back
Top