Behind door handle scratches (too rough for Menzerna 2500?)

J

Jester2893

New member
Joined
Jun 17, 2015
Messages
26
Reaction score
0
So I have some scratches behind the door handle that I can't see to correct. I have searched the forum and I have seen people using small pads/microfibers and a combination of corrective polishes. I assumed the Menzerna 2500 would take care of it with a microfiber but it doesn't seem to be doing much of anything. I'm guessing they are deeper then I thought. I was going to pick up some scratch x but I figured what I had already was more abrasive. So I'm not sure if it's a new product I should be trying or possibly trying to apply it with a 3" orange pad or something. A shame since the rest of the door came out well aside from the handle and behind the handle itself.
 
I was hoping to avoid another product only because it seems that I will only need it for behind the door handles AND possibly my door jams, but I haven't tested that yet.

I might have to wait a few weeks till I order some more supplies in order to keep my shipping costs low if I go with the fg400. I'll definitely look into it more and do some more research on it though.
 
When working behind door handle's where they are regularly subjected to fingernail scratches, you will often times need the most cutting power to accomplish defect removal as you will likely be working by hand in these intricate areas.

This is where you will benefit from using a cutting compound to help rid these defects in these areas.
 
Maybe another Geeker lives near you that has something in their arsenal that can help you out.
 
You can always add a free sample of WG Uber compound if you're over the $95 mark on your next order.
 
Mike@DedicatedPerfection said:
When working behind door handle's where they are regularly subjected to fingernail scratches, you will often times need the most cutting power to accomplish defect removal as you will likely be working by hand in these intricate areas.

This is where you will benefit from using a cutting compound to help rid these defects in these areas.
Click to expand...

Thanks I think I might have to add another product to the collection : ).


Zubair said:
Meguiars Ultimate Compound
Click to expand...

I tried this and it didn't help, which made me think picking scratch x again wouldn't work either.

ph16 said:
You can always add a free sample of WG Uber compound if you're over the $95 mark on your next order.
Click to expand...

I wish I thought of this before I just placed my $200 order and thought I would be good for a bit haha.

Maybe I can pick up some meguirs m105 or something locally just for behind the handles door jams where I need the most correction.
 
Good question! I have no paint left on the back side of my drivers door handle due to the previous owner (I can only assume he/she had many rings on). I was thinking of having it repainted but no one notices the back side of a door handle IMHO, but still worth detailing if your a pro but as an enthusiast I have to draw a line somewhere or I'd be outside all day wiping her down.

Good luck and I'd love to see some before and afters...
 
Jester2893 said:
Thanks I think I might have to add another product to the collection : ).




I tried this and it didn't help, which made me think picking scratch x again wouldn't work either.



I wish I thought of this before I just placed my $200 order and thought I would be good for a bit haha.

Maybe I can pick up some meguirs m105 or something locally just for behind the handles door jams where I need the most correction.
Click to expand...
I know if you search online you can find 8 oz bottles of M105.
 
I guess I was just trying to get confirmation before I spent more money haha. At least I know my technique is correct just need something more abrasive. I'll get the 8oz bottle of some m105 because I'm sure I'll need it on an orange or white pad because I have a lot of maring on my inside door jams from the previous owner hitting with their feet all the time I suppose. I'll be sure to update everyone with some new pictures when it's all done!
 
I'm also in the "most aggressive" camp on this area. I have a couple of heavy duty paint sticks i have glued an old cut up orange LC pad to to reach in behind the handle and most often use Menz. FG400 or Meg's M105. I then finish it out with a MF towel and a lighter polish to gloss it up and match the existing door panel.

I then advise the client of the extreme scratching found in those areas and advise of future care!
 
Jester2893 said:
I guess I was just trying to get confirmation before I spent more money haha. At least I know my technique is correct just need something more abrasive. I'll get the 8oz bottle of some m105 because I'm sure I'll need it on an orange or white pad because I have a lot of maring on my inside door jams from the previous owner hitting with their feet all the time I suppose. I'll be sure to update everyone with some new pictures when it's all done!
Click to expand...
I'd use a microfiber towel instead and then finish with foam and M205.
 
conman1395 said:
I'd use a microfiber towel instead and then finish with foam and M205.
Click to expand...

I planned to do the m105 but I planned to finish with Menzerna 2500 or the 4000 I have.

I was going to use a microfiber for the door handle pockets but was considering using a pad for the door jams. After checking my jambs I think I'll use a microfiber with m105, then go and finish with a foam applicator padwith the 2500, if I wanna go further I'll finish it off with the 4000.
 
Jester2893 said:
I planned to do the m105 but I planned to finish with Menzerna 2500 or the 4000 I have.

I was going to use a microfiber for the door handle pockets but was considering using a pad for the door jams.
Click to expand...
Oh right on then, yeah definitely a pad for door jambs.

I love Meguiar's, Menzerna, Rupes, and 3D HD products by machine, but I only use Meguiar's products if I work by hand, the Menzerna products don't work as well by hand for me. Maybe it has to do with the diminishing abrasives? I honestly don't know and your experience may be different.
 
You must log in or register to reply here.
Back
Top