Best Glaze !!!with Filling Properties

trhland

trhland

New member
Joined
Nov 8, 2006
Messages
3,998
Reaction score
0
OK SO MY WIFE WANTS ME TO DETAIL HER BOSSES HONDA PILOT. ITS GOT A TON OF SWIRLS. HE ONLY WANTS TO PAY ME 140 BUCKS FOR A WHOLE DETAIL. SO WHAT IS THE BEST GLAZE TO COVER UP THE SWIRLS?
 
dontsleeponit said:
too bad of shape for 360?

maybe mix 360 with some 106ff?
Click to expand...
im not sure.im thinking of ordering menzerna glaze hmmm. i want to do a nice job on the car. but i dont want to spend 2 days polishing ya know
 
i have heard 3M Imperial Hand Glaze is one of the best(if not the best) at filling minor swirls.
 
trhland said:
OK SO MY WIFE WANTS ME TO DETAIL HER BOSSES HONDA PILOT. ITS GOT A TON OF SWIRLS. HE ONLY WANTS TO PAY ME 140 BUCKS FOR A WHOLE DETAIL. SO WHAT IS THE BEST GLAZE TO COVER UP THE SWIRLS?
Click to expand...


if he wants to pay 140 then he should get 140 worth of work. I would try poli-seal with polishing pad and cover with opti-seal. Couldn't be faster and leave time for wheels, interior, etc.
What color honda?
Did he ask for the finish to be swirl free?
 
Poorboy's Polish with Sealant works good on $150 cleanup's. Cleans the paint like no other. Product X from Blue Coral wouldn't be beneficial on white, not that anything really is, but it is great for scratches behind the door handles of dark colored vehicles.

Throw down a good polish, then glaze, then wax and you should be good. Don't forget to clay if you won't it all to stick :)
 
pt91 said:
if he wants to pay 140 then he should get 140 worth of work. I would try poli-seal with polishing pad and cover with opti-seal. Couldn't be faster and leave time for wheels, interior, etc.
What color honda?
Did he ask for the finish to be swirl free?
Click to expand...
the colors black and hes not looking for a show car finish
 
Try XMT 360 or Poorboy's PwS with an orange pad. One-stepper, should get most of them out. Then top it off with Opti-Seal. Are you doing interior too?
 
supercharged said:
Try XMT 360 or Poorboy's PwS with an orange pad. One-stepper, should get most of them out. Then top it off with Opti-Seal. Are you doing interior too?
Click to expand...
ya the whole thing its a mess. i tiold my wife to bring it to me one day so i can try out a section of the hood . then when im ready ill takle the whole car. its a freakin mess let me tell ya. looked like some one washed it with a brillo padIm the MAN
 
trhland said:
ya the whole thing its a mess. i tiold my wife to bring it to me one day so i can try out a section of the hood . then when im ready ill takle the whole car. its a freakin mess let me tell ya. looked like some one washed it with a brillo padIm the MAN
Click to expand...
Sounds like you might need Menzerna SIP.
 
From how you describe the swirls, I doubt any glaze is going to do much. I'd clay, polish with 106FF to reduce swirls, then go with XMT 360 or Poli-seal and perhaps top with Optiseal.

Just do what you can for $140.
 
Megs swirl remover 2.0 #9

Some good $hit yo.



product_M0901.jpg
 
If he/she is not paying for paint repair don't do it or worry to much about it. 360 it and then NXT it since it has fillers from what others have reported.
 
You must log in or register to reply here.
Back
Top