malachi0420
New member
- Apr 2, 2010
- 74
- 0
Awsome thread!:hungry:
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
I will be interested to see if you notice any streaking in a day or two. I sometimes have this happen to me, I think this is more than likely me applying the sealant too thick. According to the directions, it only takes 2oz of sealant for a whole vehicle.
And Tad steps up with several samples to try out :dblthumb2:
Paste Wax 1
Paste Wax 2
Car Wash A
Car Wash B
Air Freshener - It smells pretty good and it even passed the wife test as most air fresheners give her a headache. Looking forward to finding out what it is, I don't have a clue of the brand or fragrance.
Now I just need a couple dirty cars that need washed and waxed :autowash:
How exactly do you give samples of paste wax?
In the travel section of the toiletries department of Fred Meyer thay have these small containers. I dip out some paste with a spoon and transfer it to the container.(works well)...
![]()
OK so I have just completed the "test" with wax #1 & #2.
First let me say that I already knew what wax #1 was but I wanted to make things even for Tad. Lets just keep wax #1 a secret and I'll send it to another lucky tester
So I just went out and clayed and used pinnacle paintwork cleansing lotion to start out even. I applied wax #1 on the left and wax #2 on the right.
Wax #1 is a WOWO product and went on smooth as silk and can off just as easy. Like I said I already know what this is so I wont go any further then that.
Wax #2 really has me stumped. The odor and feel is very close to wax #1. I was instructed to apply it, let it haze then wipe off. I applied it heavy in spots just to see how well a thick coating comes off. After it hazed I did the finger swipe test and thought I will be having a hard time wiping this wax off. Well I was wrong, using a clean MF it wiped off with zero problems. It left a very shiny and smooth finish on the paint and I couldn't tell any difference from the two waxes.
Now to be fair, I just spent the last couple days perfecting the finish on the car so it is 99% blemish free and 100% on the panel I tested the wax on. I really didn't expect to see a difference from the two. Maybe after a day or two I will notice one being a little deeper, only time will tell.
HaHa!!! I figured out what both of them are!!!!!!!!! Im the MAN
Gonna pm Tad to see if I'm right...
So now here comes the problem. If folks are going to test out these blind samples and then post their reviews ... how are the rest of us going to find out what they are?
Dwayne and Cee Dog are figuring them out but then sending the samples on to others. So you either ruin it for the next person or the forum (specifically me :laughingwill never figure it out.
So now here comes the problem. If folks are going to test out these blind samples and then post their reviews ... how are the rest of us going to find out what they are?
Dwayne and Cee Dog are figuring them out but then sending the samples on to others. So you either ruin it for the next person or the forum (specifically me :laughingwill never figure it out.
OK so I have just completed the "test" with wax #1 & #2.
First let me say that I already knew what wax #1 was but I wanted to make things even for Tad. Lets just keep wax #1 a secret and I'll send it to another lucky tester
So I just went out and clayed and used pinnacle paintwork cleansing lotion to start out even. I applied wax #1 on the left and wax #2 on the right.
Wax #1 is a WOWO product and went on smooth as silk and can off just as easy. Like I said I already know what this is so I wont go any further then that.
Wax #2 really has me stumped. The odor and feel is very close to wax #1. I was instructed to apply it, let it haze then wipe off. I applied it heavy in spots just to see how well a thick coating comes off. After it hazed I did the finger swipe test and thought I will be having a hard time wiping this wax off. Well I was wrong, using a clean MF it wiped off with zero problems. It left a very shiny and smooth finish on the paint and I couldn't tell any difference from the two waxes.
Now to be fair, I just spent the last couple days perfecting the finish on the car so it is 99% blemish free and 100% on the panel I tested the wax on. I really didn't expect to see a difference from the two. Maybe after a day or two I will notice one being a little deeper, only time will tell.
Tad, check your pm. Did I get it right?