builthatch
New member
- May 25, 2008
- 2,352
- 0
this is long, but i appreciate anyone who takes it in to see what's doin'
earlier in the month, a body shop had my car for over a week and a half. i got some rear fender work done on my mazdaspeed3 at a local place that is 'known' for custom paint. i've been in the area forever and have never quite been happy with the body shops in the area, so i figured on a recommendation i'd try this place. it's about 30 minutes from my house...maybe a bit more.
i got the car back (mazda silver sunlight metallic) and in the sun it looked awesome. got i back in the garage and it looks absolutely terrible. looks horrible at night in a parking lot too. in fact, i've never seen a finish leave a shop as bad as this thing looks. the color is awesome; perfect match...really- the metallics, the tint...everything. the problem is there is trash in the paint left and right...little nibs, small fish eyes, dark dirt, bubbles......everywhere! i asked them to refinish the hood, and they painted over tiny chips...not to mention it looks like there is slight road rash alll over the place and there are tons upon tons of fine scratches everywhere. it's an absolute disaster.
to top it off, they missed the flat part of the flare where it meet the bumper cover...it goes flat in shape for a second on the edge. and, on the other side, they somehow made an outward impression in the metal that follows the contour of the flat part of the flare they corrected...it's literally another metal crease that was absolutely, 100% NOT there previously. it looks horrible.
so, my question is, i paid to have this thing done as perfectly as possible. the guy knows i'm picky as i've detailed my exploits in the area, my car is pristine, and he knows i do high end detailing on the side.
i took the thing back immediately and told the young kid shop manager i was realllllly disappointed. he said he understood and asked i bring the car back on tuesday when the owner is back in town. my friend is a PPG paint rep, but formerly worked for BASF/Glasurit and when i described the issues he said that is sound like they just didn't paint the thing with much care, and didn't take the time to try to correct the paint issues.
so, i took the thing back again so the owner could see it and as i expected he was acting as if he was aggravated. of course i know he shouldn't be like that, but i think that he is pissed at himself for underestimating the hours needed to handle this job appropriately, cut some corners, and now is backed into a corner by me because i'm no slouch.
i told the dude that i know money talks and if he honestly underestimated things, to tell me what it'll cost to make it right. i was estimated about 600 dollars more by a competing shop so i know the job is not cheap. this guy charged me 1250+tax :shrugs:
i took the car to a trusted and experienced shop manager local to me and he said that the guy simply did not take the time to complete the job and agreed that typically people don't want to pay the money required to have it done perfect. the problem is this is so far from perfect it's worse than it was going in.
the main problem now isn't necessarily the finish, because he said he'll take care of it (rolls eyes), but it's the ridge above the fender flare where he worked and the corner he cut short while making the flare flat part follow the line into the bumper cover. anyway, the ridge is actually in the panel somehow. whether it was there before (it wasn't) or not is a moot point because i wanted the 1/4's returned to factory condition, so...it's his fault for missing it OR creating it (trust me it was NOT there before)
he said he is going to think about how to handle this properly and told me to bring the car back next monday. this whole episode is just incredible...i can't win down here.
btw, if you are wondering why i didn't take it to the shop where i have the friend as a manager, it's because there they really do production work and he didn't think that i'd want to pay the 1500-1800 it would have cost for it to be done right. little does he know i would have paid that IF it meant the damn thing would be atleast close to factory.
i'm really pissed now. this whole thing is going to take over a month and who knows if it'll be right. i really do not think that this guy will be able to do it right...i think they just don't have the skills or equipment OR care to do it so it looks decent. i just don't trust this guy's ability now, and i'm stuck because he's so deep into the job. it's not like i can dispute the charge on my card for this.....or can i?
what would you all do?
earlier in the month, a body shop had my car for over a week and a half. i got some rear fender work done on my mazdaspeed3 at a local place that is 'known' for custom paint. i've been in the area forever and have never quite been happy with the body shops in the area, so i figured on a recommendation i'd try this place. it's about 30 minutes from my house...maybe a bit more.
i got the car back (mazda silver sunlight metallic) and in the sun it looked awesome. got i back in the garage and it looks absolutely terrible. looks horrible at night in a parking lot too. in fact, i've never seen a finish leave a shop as bad as this thing looks. the color is awesome; perfect match...really- the metallics, the tint...everything. the problem is there is trash in the paint left and right...little nibs, small fish eyes, dark dirt, bubbles......everywhere! i asked them to refinish the hood, and they painted over tiny chips...not to mention it looks like there is slight road rash alll over the place and there are tons upon tons of fine scratches everywhere. it's an absolute disaster.
to top it off, they missed the flat part of the flare where it meet the bumper cover...it goes flat in shape for a second on the edge. and, on the other side, they somehow made an outward impression in the metal that follows the contour of the flat part of the flare they corrected...it's literally another metal crease that was absolutely, 100% NOT there previously. it looks horrible.
so, my question is, i paid to have this thing done as perfectly as possible. the guy knows i'm picky as i've detailed my exploits in the area, my car is pristine, and he knows i do high end detailing on the side.
i took the thing back immediately and told the young kid shop manager i was realllllly disappointed. he said he understood and asked i bring the car back on tuesday when the owner is back in town. my friend is a PPG paint rep, but formerly worked for BASF/Glasurit and when i described the issues he said that is sound like they just didn't paint the thing with much care, and didn't take the time to try to correct the paint issues.
so, i took the thing back again so the owner could see it and as i expected he was acting as if he was aggravated. of course i know he shouldn't be like that, but i think that he is pissed at himself for underestimating the hours needed to handle this job appropriately, cut some corners, and now is backed into a corner by me because i'm no slouch.
i told the dude that i know money talks and if he honestly underestimated things, to tell me what it'll cost to make it right. i was estimated about 600 dollars more by a competing shop so i know the job is not cheap. this guy charged me 1250+tax :shrugs:
i took the car to a trusted and experienced shop manager local to me and he said that the guy simply did not take the time to complete the job and agreed that typically people don't want to pay the money required to have it done perfect. the problem is this is so far from perfect it's worse than it was going in.
the main problem now isn't necessarily the finish, because he said he'll take care of it (rolls eyes), but it's the ridge above the fender flare where he worked and the corner he cut short while making the flare flat part follow the line into the bumper cover. anyway, the ridge is actually in the panel somehow. whether it was there before (it wasn't) or not is a moot point because i wanted the 1/4's returned to factory condition, so...it's his fault for missing it OR creating it (trust me it was NOT there before)
he said he is going to think about how to handle this properly and told me to bring the car back next monday. this whole episode is just incredible...i can't win down here.
btw, if you are wondering why i didn't take it to the shop where i have the friend as a manager, it's because there they really do production work and he didn't think that i'd want to pay the 1500-1800 it would have cost for it to be done right. little does he know i would have paid that IF it meant the damn thing would be atleast close to factory.
i'm really pissed now. this whole thing is going to take over a month and who knows if it'll be right. i really do not think that this guy will be able to do it right...i think they just don't have the skills or equipment OR care to do it so it looks decent. i just don't trust this guy's ability now, and i'm stuck because he's so deep into the job. it's not like i can dispute the charge on my card for this.....or can i?
what would you all do?