Bought a Tornador Max.

DanaDetailingPros said:
CRAZY PRICE!!! Wish I had a shop:(

https://www.amazon.com/dp/B07G8KJ15B/?coliid=I1BL7RET3GR4VJ&colid=SVO1M1JBY9NE&psc=1&ref_=lv_ov_lig_dp_it
Click to expand...

I don't have a shop, I'm just a weekend warrior with good base of friends. They sell cheaper than list, not low cost, but the flex is one of the best.

DanaDetailingPros said:
Has the best specs on any extractor under 2K! 205" lift is insane!
Click to expand...

It is a great unit. Can be had for about $1,200

DanaDetailingPros said:
I need to order a few parts to use the Tornador max with the Vac attachment. I was considering buying a gall of there enzyme cleaner since I had to pay freight anyway. Do you recommend a better product to use in a gallon size that's a decent price?
Click to expand...

Their Enzyme product is excellent. I have the gallon size. It's pH neutral, which is best for the internals of the Tornador. Pick up some WD-40 and be sure to lube up/degrease the metal rotational part of the tool every.single.use It's key to it's longevity.
 
TTQ B4U said:
I don't have a shop, I'm just a weekend warrior with good base of friends. They sell cheaper than list, not low cost, but the flex is one of the best.



It is a great unit. Can be had for about $1,200



Their Enzyme product is excellent. I have the gallon size. It's pH neutral, which is best for the internals of the Tornador. Pick up some WD-40 and be sure to lube up/degrease the metal rotational part of the tool every.single.use It's key to it's longevity.
Click to expand...
I'm totally grateful for your knowledge and help. I have an email into Tornador to buy a part they just came out with that they said is not on there site yet. But they do have them and it will make for a much better fit and the hose won't stick up but horizontal from the gun. I've been seeing it on there adverts as well as the Sema video.
View attachment 76006
 
Yes, please post with information on this part when you get it. Thanks.
 
I just ordered from them. I had to spend $100 to get out of a $30 freight charge:wowwow:
And I really didn't want more than a screw and the VCA-200 Velocity-Vac Adapter. I ended up getting a gallon of there Enzyme cleaner. Was told by TTQ AKA Carpet whisperer it's really great stuff!
I really hate high freight charges and totally steers me away from buying 90% of the time! Unless in this case it's the 10% exception since there the only show in town to get one from. I would of been better off just ordering a whole new Velocity Vac if I had known:( I bought the max on sale for $199 vs. $250 and found a seller on eBay that sells just the vac head.
Anyway I have to say that it is the single best interior tool I have with the exception of the vac itself. I did a whole interior detail yesterday on a good sized SUV and it chopped my time in half! I was so blown away! Literally felt stupid not owning one sooner. I used Megs 14901 in the jar and the whole car only used a third. I really can't wait to try it with the vac:dblthumb2:

View attachment 76007
 
Wait. So the new, in-stock VVs come with that 135° elbow, but not the one you got off eBay? Is that what I’m getting out of this?
 
Pulled the trigger on a Max/VV with the 15 off today. Didn’t order Enzyme, what other of my gazillion APCs and textile products can I use in it?
 
I put Meg's 149 But it would be insane with P&S express interior. Dude you are going to SH$T Little green apples when you use it!!! I even ran it just fine on the 2.6 CFM @ 90PSI Porter Cable Compressor I got for $119 at Acme Tool. I wasn't going balls out squeezing the trigger which majority of us wouldn't anyway. I'd do a panel at full capacity and then follow with a spray bottle with P&S Express.Then when I was ready to hit another area the compressor was already off and at full capacity again. it would run at full throttle for 45-60 seconds at a time which is more than enough! Don't worry what you read on everyone saying it has to have a minimum of 5.2 CFM. Takes up tons of room and you need a minimum of a 4KW generator just to run a 15-20 amp compressor.let me know if you decide to grab a coiled hose I found a place that is half the price as Obsessed Garage and everyone else. And guns are on eBay.But they run out of stock quick on the models I got. But they get more every week.
I bought a Prevost air hose 3.8 X 50 and a coiled 26" and 3 guns also. View attachment 76013View attachment 76014View attachment 76015View attachment 76016View attachment 76017View attachment 76018
 
SameGuy said:
Pulled the trigger on a Max/VV with the 15 off today. Didn’t order Enzyme, what other of my gazillion APCs and textile products can I use in it?
Click to expand...
You were smart to grab both at the same time. I hope you got the newer model VV
? They come with that new part that cost me $100 today since I had to spend $100 before free freight or I would pay $29 for shipping! F THAT! I just bought like 6 of then and I'll sell them to get my $ back.lol
 
I just tried to piece mine. I only wanted the vac head. Then after realized that new part they just got in. I literally found out about them 2 days before they were going to put them on there website. I have like 9 corresponding emails back and forth with John at Tornador and he said I saw it up before he had even seen it! He was super helpful.
 
TTQ B4U said:
It's pH neutral, which is best for the internals of the Tornador. Pick up some WD-40 and be sure to lube up/degrease the metal rotational part of the tool every.single.use It's key to it's longevity.
Click to expand...

Truth. I just order a new rotation set for my tornador black. Mine caught some grit inside. I tore it all apart and cleaned it to no avail. When they start wearing out they make a louder noise that irritates the heck out of me.


Sent from my iPhone using Tapatalk
 
You must log in or register to reply here.
Back
Top