Okay, so we just picked up a brand new Mytee 1500 Focus Vapour Steamer yesterday, and being our first steamer, I’ve been eager to give it a try. Opened up the bay tonight, brought a car in and set up the steamer. Added 2 Gallons of distilled water (about half full, I did not want to fill it in case of an issue and not sure how much water this thing goes through yet) followed the instructions on the manual. Add water, hold pump for 15 seconds then turn heater on. I vacuumed the car out and by that point the heater light had turned off. I grabbed the wand, so excited to see what this could do and to my surprise nothing had come out. No steam, no water, absolutely nothing. I thought I would try the process again. Turned off the heater and held the pump for 15 seconds. I could hear a clicking noise that I had not heard when I first started it. Flicked the heater switch back on and the red light was still out, but no steam. Held the pump button again with Hester on. No difference. Let it sit for 15 minutes and unplugged the unit then opened up the top. I did a quick visual and everything looks to be okay. No kinks in the lines. I have tried researching online for the last hour with no results. Is there a defect with this machine? Am I doing something wrong? I’m stumped. And never having a steamer before, I have no idea what to look for.
Thabks for everyones replies and I appreciate any input you may have!
Thabks for everyones replies and I appreciate any input you may have!