Car Detailing Tech Session & Demo at the Ace Café in Orlando!

Joined
Dec 5, 2022
Messages
51,004
Reaction score
6
Car Detailing Tech Session & Demo at the Ace Café in Orlando!


Tech Session starts at 9:00am sharp!


This Saturday, Team Autogeek will be at the ACE Café in Orlando from 8:00am to 2:00pm with a Tech Session taking place inside the ACE Café starting at 9:00am sharp and going until 9:30am.


Here's our demo car for this Saturday, it's a neglected 2008 BMW Mini Cooper!

Now this car needs an extreme makeover!

ACE_Demo_Car_01.jpg



Paint looks neglected....


Tech Session 1 - Restore the paint

ACE_Demo_Car_02.jpg




Headlights are definitely neglected...

Tech Session 2 - Restore the headlights

ACE_Demo_Car_03.jpg



Wheels, tires and plastic trim around wheel arches --> neglected

Tech Session 3 - Restore the rims, tires and plastic trim

ACE_Demo_Car_04.jpg




You can't see road film on glass "easily" from a picture but when the paint is neglected and stained you know the glass is too...

Tech Session 4 - Machine polish glass and apply glass coating

ACE_Demo_Car_05.jpg



Convertible top is a severely neglected - looks like a job for RaggTopp!

Tech Session 5 - Restore and protect canvas top

ACE_Demo_Car_06.jpg


Note: here's how you restore a canvas top

NEW Haartz/RaggTopp Convertible Top Brush - How to clean and protect a convertible top






Vinyl graphics might be toast, but we'll see what we can do to bring them back to life...

Tech Session 6 - Restore vinyl graphics

ACE_Demo_Car_07.jpg




The ACE CAFE in Orlando
100 W. Livingston Street
Orlando, FL 32801
(Corner of Livingston & Garland)

Ace_Cafe_m.jpg



ACE CAFE ORLANDO - Facebook



Schedule

7:00am - We'll be there at o set-up

8:00am - Cars & Coffee starts

9:00am to 9:30am - Tech Session inside Ace Café

9:30am to 2:00pm - Autogeek booth will be set up in front of the main entrance for hands-on demos and taking questions



See you at the ACE!



:)
 
Just to note....

The first Tech Session this Saturday will be on how to correctly restore the paint on the 2008 Mini Cooper.


I'll be sharing,

  1. Waterless wash
  2. Baggie Test
  3. Detailing Clay
  4. Orbital Polishers
  5. Foam Pads
  6. One-Step Cleaner/Wax



After the Tech Session, myself, Bobby and Yancy will be at the Autogeek booth right out front to answer questions and let people test out tools...


:)
 
Sorry I will miss this!
A suggestion for your travel - don't get on I-4 if possible! Use 528/417/408 from I-95 and drive thru downtown O-town. And I can highly recommend stopping for lunch at Bad As's Sandwich, a little east of downtown and on the way back to the 408 (East-West Expressway).
 
Ahh, these ones are my bread & butter details. Actually, if it had New Zealand licence plates on it I would've guessed it was a local car.

Mike - this will be somewhat of an Extreme Makeover for this Mini, it sure looke like the perfect before & after vehicle & perfect for showcasing how awesome us detailers are! :buffing:

Have fun team.

Aaryn NZ. :dblthumb2:
 
Re: Car Detailing Tech Session & Demo at the Ace Café in Orlando!

Sorry I will miss this!
A suggestion for your travel - don't get on I-4 if possible! Use 528/417/408 from I-95 and drive thru downtown O-town. And I can highly recommend stopping for lunch at Bad As's Sandwich, a little east of downtown and on the way back to the 408 (East-West Expressway).

A chance of a traffic issue. It looks like it's supposed to finish nightly work BY 5 am. (I-4 Ultimate Project website. Construction Map | I-4 Ultimate. I hope this is outside link is ok with the moderators.) Also appears minimal work over Easter weekend.

I hope to be there.
 
Car Detailing Tech Session & Demo at the Ace Café in Orlando!

Sorry I will miss this!
A suggestion for your travel - don't get on I-4 if possible! Use 528/417/408 from I-95 and drive thru downtown O-town. And I can highly recommend stopping for lunch at Bad As's Sandwich, a little east of downtown and on the way back to the 408 (East-West Expressway).

A chance of a traffic issue. It looks like it's supposed to finish nightly work BY 5 am. (I-4 Ultimate Project website. Construction Map | I-4 Ultimate. I hope this is outside link is ok with the moderators.) Also appears minimal work over Easter weekend.

I hope to be there.


Thank you to both of you!

We don’t want to be late.

We’re leaving the Geek at 5:00am - we should be good.

 
The mini cooper is so cool. I wish I had one.


So you join our forum. Then put your spam links in your Signature Line and think no one will notice. Here's a screenshot of your spam links, werid thing is your links go to a furniture website. To be honest, you would have better luck selling furniture going through normal, honest business marketing strategies instead of spamming a car detailing discussion forum.


spammerfurniture.jpg




Hang tight while you ban yourself.


:)
 
Back
Top