Wors
New member
- Jun 15, 2012
- 783
- 0
The Chemical Guys products were won in the AutoGeek Chemical Guys Contest.
Chemical Guys Bare Bones Undercarriage Spray 16 oz.
Chemical Guys Extreme VRP Dressing 16 oz
Chemical Guys Wheel Guard 8 oz.
Other products used:
Meguiars APC - 10/1
Meguiars Super Degreaser - 4/1
CarPro Iron X Iron Remover
Pinnacle Shampoo Sample
Stoner Tarminator Bug and Tar Remover
MF Wash Mitt
Clean Wheel Lug Nut Brush
Daytona Speed Master Jr. Wheel Brush
Short Handle Tire/Wheel Brush
Indigo Microfiber Applicator
Tire & Trim Dressing Applicators 2 pack
Metro MasterBlaster 8hp
The products were used on a 2007 BMW Z4M and 2004 BMW X5.
The wheel wells, tires and rims were all rinsed. Meguiars APC was sprayed in the wheel well and agitated with the Wheel Brush. The tire was sprayed with Meguiars Super Degreaser and brushed with the Wheel Brush. APC was sprayed on the wheel and cleaned with the Wheel Nut Brush and Daytona Brush. Last the wheel was washed with a MF wash mitt.
Before - Z4M
Before - X5
Iron-x was sprayed on wheels and left to dwell. Tarminator was also used to help remove the tar behind the rims. The wheels were dried using the MasterBlaster.
Iron X - Z4M
Iron X - X5
The sprayer on the Bare Bones did not mist very well and dripped too much. I poured the Bare Bones into a Meguiars Generic bottle and used one of the gray sprayers. This allowed the bare bones to be applied in a very fine mist.
CG Wheel Guard was applied using a Indigo MF applicator. It takes very little product to cover a single wheel. After it hazed in ~15 minutes I buffed the wheel with a MF towel.
Recently I purchased the Blue Tire & Trim Dressing applicators on BOGO. One was used to apply the CG Extreme VRP Dressing. The dressing went on very easy with the applicator and wiped with a MF after a few minutes.
After - Z4M
After - X5
Thanks for reading the review. Very curious to see how the Wheel Guard does against the BMW brake dust.
Chemical Guys Bare Bones Undercarriage Spray 16 oz.
Chemical Guys Extreme VRP Dressing 16 oz
Chemical Guys Wheel Guard 8 oz.
Other products used:
Meguiars APC - 10/1
Meguiars Super Degreaser - 4/1
CarPro Iron X Iron Remover
Pinnacle Shampoo Sample
Stoner Tarminator Bug and Tar Remover
MF Wash Mitt
Clean Wheel Lug Nut Brush
Daytona Speed Master Jr. Wheel Brush
Short Handle Tire/Wheel Brush
Indigo Microfiber Applicator
Tire & Trim Dressing Applicators 2 pack
Metro MasterBlaster 8hp
The products were used on a 2007 BMW Z4M and 2004 BMW X5.
The wheel wells, tires and rims were all rinsed. Meguiars APC was sprayed in the wheel well and agitated with the Wheel Brush. The tire was sprayed with Meguiars Super Degreaser and brushed with the Wheel Brush. APC was sprayed on the wheel and cleaned with the Wheel Nut Brush and Daytona Brush. Last the wheel was washed with a MF wash mitt.
Before - Z4M
Before - X5
Iron-x was sprayed on wheels and left to dwell. Tarminator was also used to help remove the tar behind the rims. The wheels were dried using the MasterBlaster.
Iron X - Z4M
Iron X - X5
The sprayer on the Bare Bones did not mist very well and dripped too much. I poured the Bare Bones into a Meguiars Generic bottle and used one of the gray sprayers. This allowed the bare bones to be applied in a very fine mist.
CG Wheel Guard was applied using a Indigo MF applicator. It takes very little product to cover a single wheel. After it hazed in ~15 minutes I buffed the wheel with a MF towel.
Recently I purchased the Blue Tire & Trim Dressing applicators on BOGO. One was used to apply the CG Extreme VRP Dressing. The dressing went on very easy with the applicator and wiped with a MF after a few minutes.
After - Z4M
After - X5
Thanks for reading the review. Very curious to see how the Wheel Guard does against the BMW brake dust.
