Cleaning Leather Help Please

DogRescuer

New member
Joined
Apr 6, 2013
Messages
1,801
Reaction score
0
I cleaned a customers leather seats and got well 80% better, he was pleased.

I used Pinnacle and a light brush. My ? is how would I get some of those craccks and crevices in the leather 100% for my own OCD benefit, you know dirt only "we" can see.

Maybe steam?
Iron, not sure how.
 
For treated leather I use 1z deep plastic cleaner my go to stuff and for none treated leather I use leather masters another great product. After using 1z I use Sonax leather foam.
 
For treated leather I use 1z deep plastic cleaner my go to stuff and for none treated leather I use leather masters another great product. After using 1z I use Sonax leather foam.
Thanks, but plastic cleaner for leather?
 
Steam s real good . I m a fan of Leatherique , use the combo in my car , my mother s & leather seats in house .

You can start cleaning the leather with warm damped mf sponge at first then the product that you re using , it helps allot on my end .
 
I use steam quite successfully but on real old stains I have had to resort to diluted APC and a soft bristle brush, with repeated applications. Followed up with a rinse wipe and the steam to remove the APC. A good conditioning to put needed moisture back into the leather as well.
 
Thanks, but plastic cleaner for leather?

Its made to clean coated leather and is very safe for this use I've been using for over to years and never a problem. Here is a picture of a leather seat I did.

1z deep plastic cleaner

A concentrated deep cleaning detergent that removes stubborn grime, grease, scuff marks, stains, soot and polish residue without harsh or abrasive cleaners.

Use on the dashboard, steering wheel, shift knob, arm rests, finished leather and pedals. Leaves a clean, no-shine finish.

Removes stubborn grime from all interior trim
Removes scuff marks
Non-caustic formula won't harm surface
Leaves an anti-static finish
 
The leather is coated with a vinyl/plastic coating. Be careful not to use the 1Z where the coating is worn off. It will screw up the dye.

This is why with any product always do a test spot and I have never had a problem with this product.
 
Back
Top