Coating Recommendation

[FUNX650]

I often wondered though what would
happen of you were to mix classic and
UK together and then apply it since
Finest has SiO and TiO2.

My understanding is that the binary
composite SiO2/TiO2 will have a
"sponge-like" nanostructure (with an
average "pore" size of ~10 nm); and
will also display a significant amount
of photo-catalytic behavior.

•The question may well then become:
-Will the above binary composite's
characteristics be beneficial in/to
a formulation of an automotive
paint Coating?


Or this:

The two would mix into a mixture that
would expand and engulf the entire
universe in a layer of glossy hard shell
that we will forever be frozen in time.
(Don't try this at home)

^^^ :xyxthumbs: ^^^


Bob

 

[WillSports3]

I'm going to try this one of these days. I have some Cquartz Classic and some Cquartz UK so next time I get a weekend off.. I'm going to mix some together and use it.. see what happens. I wonder how long I have to shake the mixture for or let the two coatings settle together to get them to bond.

 

[Jowillie]

I'm going to try this one of these days. I have some Cquartz Classic and some Cquartz UK so next time I get a weekend off.. I'm going to mix some together and use it.. see what happens. I wonder how long I have to shake the mixture for or let the two coatings settle together to get them to bond.

I'm not a chemist, but when it comes to mixing proprietary blends, like bourbon, vodka, wine, beer or even shampoo I have learned it may be best to talk to someone experienced with the chemistry.:cheers: Why don't you just call the company and ask? I think the number is 386.259.0759.
Better safe than sorry.

 

[WillSports3]

Welp I've emailed Corey at Carpro US to see what he could tell me about if I was to mix the two. I'm essentially wondering if it's gonna be an unusable instant flash liquid or something.

 

[Blackdevil77]

Welp I've emailed Corey at Carpro US to see what he could tell me about if I was to mix the two. I'm essentially wondering if it's gonna be an unusable instant flash liquid or something.

I'm curious as to his response. If I had to guess, I'm gonna guess he'd advise against it, but say you can top the two. Cquartz Uk first, then once that cures, top it with regular Cquartz or Cquartz TiO2 (whatever they call it)

 

[WillSports3]

Welp I've heard back from Corey. He suggested to use a base layer of UK and then another layer of TiO. When asked about mixing it, he recommended that I not try it since it would be two coatings flashing at different rates and because he is not sure if the mixture would cause an unwanted chemical reaction or not.

 

[The Guz]

This guy used UK and classic together.

http://www.autogeekonline.net/forum...-received-cquartz-treatment-ks-detailing.html

 

[Blackdevil77]

One more quick question about Gloss Coat. On their website about this product it says "Additionally, you can top Optimum Gloss-Coat with any non-abrasive wax or sealant of your choice to add additional gloss and slickenss."

Does that mean I can put Collinite 845 on top of a gloss coat coating if I wanted to? I like the water behavior of 845.

 

[The Guz]

One more quick question about Gloss Coat. On their website about this product it says "Additionally, you can top Optimum Gloss-Coat with any non-abrasive wax or sealant of your choice to add additional gloss and slickenss."

Does that mean I can put Collinite 845 on top of a gloss coat coating if I wanted to? I like the water behavior of 845.

If you are going to go through the trouble of topping gloss coat why not just stick with 845.

 

[Blackdevil77]

If you are going to go through the trouble of topping gloss coat why not just stick with 845.

Just for the added layer of protection and the ever so slight resistance to wash induced marring. Not that I intend to improperly wash my car, but it does happen and is extremely noticeable on my black car. I want the gloss coat for the protection and figured I could throw on 845 for it's water behavior. 845 with a machine is so incredibly easy to put on, it's almost as easy as a spray wax anyway.

 

[tdekany]

Yes you can top it with anything you wish. I don't do it on my cars, but we are all different.

One more quick question about Gloss Coat. On their website about this product it says "Additionally, you can top Optimum Gloss-Coat with any non-abrasive wax or sealant of your choice to add additional gloss and slickenss."

Does that mean I can put Collinite 845 on top of a gloss coat coating if I wanted to? I like the water behavior of 845.

 

[RaskyR1]

Another one to consider is GTechniq Crystal Serum Light topped with EXO or C2v3. I'm Surprised you didn't like the sheeting ability of UK though.

 

[Blackdevil77]

Another one to consider is GTechniq Crystal Serum Light topped with EXO or C2v3. I'm Surprised you didn't like the sheeting ability of UK though.

It wasn't bad. I think Cquartz Finest just spoiled me. With that, water would actually levitate and hover over the surface as if repelled by a supernatural force and would roll off.

 

[tdekany]

It wasn't bad. I think Cquartz Finest just spoiled me. With that, water would actually levitate and hover over the surface as if repelled by a supernatural force and would roll off.

While a pro product is going to be "superior" and Finest is one of the best ones, I have to mention that proper prep and application is a must with coatings. It's unlike applying a wax or sealant.

 

[Blackdevil77]

While a pro product is going to be "superior" and Finest is one of the best ones, I have to mention that proper prep and application is a must with coatings. It's unlike applying a wax or sealant.

I tried to follow the prep steps to a T when I applied it. I remember reading how important prep is. With the car I used it on, I did a full 2 step paint correction with M105, follow up by M205. After each panel, I did an IPA wipe down. Once I completely the whole car, I wiped down the whole car a 2nd time with an IPA.

 

[Blackdevil77]

Now I have another question about gloss coat. I read that you're supposed to apply the 2nd coat a minimum of 1 hour after the first coat (like most coatings). I was just reading reviews on gloss coat, and one of the reviews said this.

"use long flowing passes; apply one coat (takes about 45 minutes) then immediately apply a second coat--the first coat gave it the protection and the second coat really dialed up the shine"

This seems to go against the norm. What is the proper way to apply multiple coats of this product?

 

[The Guz]

Now I have another question about gloss coat. I read that you're supposed to apply the 2nd coat a minimum of 1 hour after the first coat (like most coatings). I was just reading reviews on gloss coat, and one of the reviews said this.

"use long flowing passes; apply one coat (takes about 45 minutes) then immediately apply a second coat--the first coat gave it the protection and the second coat really dialed up the shine"

This seems to go against the norm. What is the proper way to apply multiple coats of this product?

Apply it the same way as the first coat. No special technique required. Follow Yvan's instructions on his video on the rag company youtube channel. By the way the second coat is optional. But yes you want to at least allow 1 hour in between coats.