Compatibility question

E

Ebg18t

New member
Joined
May 31, 2014
Messages
1,400
Reaction score
0
I have been using the OPT No Rinse wash & wax for rinse less washing. I really like it. But here is my question. I polished/compounded the truck today with Menzerna PG and sealed it with 2 coats of Menzerna PL (8hrs apart). If I continue to do a rainless wash with the OPT product can I add another layer of Menzerna PL next time I wash? Or will the OPT wash interfere?
 
you'll be fine. and if for some strange reason it doesn't work, it's not like all the protection falls off the car and drips on the floor. Rock and roll, and have fun!
 
Thanks Chris. I didn't know what was in the OPT product, but on the other hand I wasn't sure how particular a Menzerna PL was. I read about people having hazing and greasy looking issues and just wanted to prevent problems.

The Menzerna PL goes on quick and easy with the Flex and comes off just as easy.
 
Ebg18t said:
sealed it with 2 coats of Menzerna PL (8hrs apart)

If I continue to do a rainless wash with the OPT product

can I add another layer of Menzerna PL next time I wash?
Or will the OPT wash interfere?
Click to expand...
By interfere...
Is this alluding to:Bonding issues?

•First of all:
-Menzerna PL is recommended to be applied to "clean" paint...where it then is said to bond to the paint.

-Yet it is often applied/"layered" on top of itself.
Does/can Menzerna PL bond to itself?

So:
Applying (layering) Menzerna PL on top of ONRWW?
IMO:
You can never have too much gloss; or protection.


Bob
 
Bob - yes, bonding is what I should have said. It is quick and easy to apply, so ever few washes I would like to reapply Menzerna PL. Keep in mind this could be several months between application as I don't always wash the truck as often as I should.
 
You should not have any issues of applying another coat of Menz PL. Since you state that you will re-apply once every few months would be my concern. Is there oxidation or dirt that needs to be clayed (or Nanoskin in my case) off? That would be the main issue. for the PL not a problem IMO
 
Kamakaz1961 said:
You should not have any issues of applying another coat of Menz PL. Since you state that you will re-apply once every few months would be my concern. Is there oxidation or dirt that needs to be clayed (or Nanoskin in my case) off? That would be the main issue. for the PL not a problem IMO
Click to expand...

The paint was clayed today (usually 1x a gear) before I used the Menzerna PG. Except for the rear boot, the remainder of the truck was surprisingly pretty clear of contaminants.

Depending on my schedule I 'may' want to apply another coat of Menzerna PL next weekend. It appears from what others are saying, I shouldn't have any problem with the ONRWW interfering with another layer of Menzerna PL.
 
Ebg18t said:
If I continue to do a rainless wash with the OPT product can I add another layer of Menzerna PL next time I wash?

Or will the OPT wash interfere?
Click to expand...


The question of whether the trace film of whatever magic is in OPT affecting the bonding of the Menzerna Powerlock would be the least of my worries.

Jut that act of pushing a creamy substance over a paint finish has a cleaning effect....

Miscible and Immiscible - Wax and Paint Sealant Bonding



:xyxthumbs:
 
Thanks Mike. I figured it was better to ask then continue to wonder if I screwed up.
 
You must log in or register to reply here.
Back
Top