Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Which coating have you chosen or which are you considering?
I am going to recommend the following. Just be aware that you will receive many recommendations for products.
Both user friendly.
Compound: SONAX CutMax Cutting Compound 250 ml.
Polish: SONAX EX 04-06 250 ml.
Alrighty here's how things turned out - pretty good.
Washed, Iron'x'd - surprised how little 'purple appeared on a 7-year-old car that spends 80% of its life on Texas highways, clayed, not issues.
I used a Lake Country Orange light cutting pads (4) with the Cut Max. I would say I got 75-80% of the swirls and etching out. I even went over some of the areas a number or times. The pad polish combo wasn't going to get the deeper scratches and clear coat damage. I think a pad with more cut would have brought the finish closer to what I was looking for. However, I also wanted to start with the least aggressive method and work up from there. Then used the EX 4-6 as the final polish with the LC White pads (2). Applied the first Memzerna sealant coat. I'll do the second tomorrow.