Cord mod, Flex 3401!!!

[arisking]

Well, this is for you guys who bought the standard version and want to make your own HD version. Or maybe for the HD guys who don't like the idea of a 25 foot cord and need something longer, haha.

As in my Rupes 15 cable mod thread I also used a 25' 14/3 winter capable rubber cord from Princess Auto.

First, open the case, T15 torx:



Next, remove the retaining clip, T15 torx, and the grub screws, Phillips, holding the wires in place:




Cord out:



Unused ground heat shrunk for neatness:



Don't forget this gray wire that goes into the white slot:



Leads installed, with that gray wire you'll remember:




Boom, your own version of the HD 3401! Hope this helps people!

Cost: $28
Time: 15 minutes

 

[Mike@DedicatedPerfection]

Re: Flex 3401 cord mod!!!

Nice, simple, and to the point. Thanks for putting this tutorial together to show how to replace the cord. It sure is nice to have the longer cord.

 

[arisking]

Thanks Mike!

I haven't even used it yet and I know it's going to be awesome!

Nice, simple, and to the point. Thanks for putting this tutorial together to show how to replace the cord. It sure is nice to have the longer cord.

 

[Pontiac G8]

Very nice write up w/ pics. I just picked up a 100' 14/3 extension cord for my brand new Flex. Guy at the store said a 12/3 is probably what's needed. Thoughts?


Sent from my iPhone using Tapatalk

 

[dcjredline]

Yeah, for 100' you should seriously consider the 12 gauge wire...it can transfer the current further with less "strain" also called heat.

Sent from my XT1030 using AG Online

 

[arisking]

Yes, you definitely need 12 gauge for 100', haha. Insurance.

 

[Kamakaz1961]

Whoa!! Way cool!! Now I can look real smart thanks to you!! I was too scared and too much of a girly girl to attempt that!!.....LOL

Now I need to figure out the gauge wire...or better yet....maybe stick with my extension cord as I still think I will blow up the Flex!!

But the pictures you show are awesome and thanks a bunch! Whenever I grow some kahunah's I may try that. But definitely a real cool thread for the Flex!

 

[arisking]

14 gauge at 25' will be totally fine. It's not a hard thing to do, just take your time, ha.

Hopefully this inspires you to do it one day!

Whoa!! Way cool!! Now I can look real smart thanks to you!! I was too scared and too much of a girly girl to attempt that!!.....LOL

Now I need to figure out the gauge wire...or better yet....maybe stick with my extension cord as I still think I will blow up the Flex!!

But the pictures you show are awesome and thanks a bunch! Whenever I grow some kahunah's I may try that. But definitely a real cool thread for the Flex!

 

[BobbyG]

This is a great step-by-step tutorial and should be a sticky! rops:

 

[1kwikf]

Thank You So Much!

 

[arisking]

Ha, thanks guys.

This is a great step-by-step tutorial and should be a sticky! rops:

Thank You So Much!

 

[aim4squirrels]

Great tutorial!

Don't do this if your Flex is under warranty, LOL.

Not sure why anyone would want a 100' cord, I trip over a 25' cord more than enough times in a correction session.

 

[DetailKitty]

Nice... Where did you get the other cord?
I need to replace mine.

 

[1kwikf]

Nice... Where did you get the other cord?
I need to replace mine.

Its just a heavy duty extension cord with 1 end cut off


Sent from my LG-LS970 using Tapatalk

 

[b0b]

Wanting to do this, but have never done anything like that before... Thanks for the thread, I might look for one on the PC and use that as my test subject...

Thanks!

Sent from my SAMSUNG-SGH-I337 using Tapatalk

 

[mylkman]

I just modded mine with the flexzilla. 25foot glow in the dark with lighted plug. No need for the glow but it was a good all weather with flexibility. Flex for the flex.