Crystal Mist And Soveran

[BILL]

TRYED A LITTLE EXPERIMENT WITH CRYSTAL MIST AND SOVERAN PASTE

After misting my pad with C.M. I then misted the panel i was about to apply souveran on and then quickly applied souveran wax mixing with the C.M. then I quickly wiped off with a M.F towel. and then BUFFED again with a finishing plush M.F.towel, and the finish seemed to me to be deeper, wetter looking, and very pleasing to the eye, it really looked even better with the C.M. if thats possible. but maybe it's my imagination, but thats what i'll do from now on with souveran and crystal mist.........:applause:

 

[abrcrombe]

Sounds good! Seems like a spit shine almost, without the coldness of the CM.

 

[BILL]

Sounds good! Seems like a spit shine almost, without the coldness of the CM.

seemed that way to me too.......

 

[ScottB]

In for another test .... spritz your applicator with a minimum amount of CM. Apply the Souveran to the panel. Just before curing, while still damp, spritz the entire panel with CM over the Souveran and wipe off with the soft micro. Let us know your results .... Im not spoiling it for you !

 

[BILL]

Wouldn't that be the same thing in reverse???


spritx wax wax spritz......

 

[Jonboy]

I love CM so i'll try that!!!!!!!

 

[scooterguitar]

Here's what I just tried, I think its similar to what Killr was saying above...
For my second coat of Souveran (just on my hood, my go to trusty test panel of choice.)
spritz of CM to foam pad
spritz of CM on hood
Spritz of cold water on hood
applied Soverand and worked in
waited a few moments, spritzed hood lightly with CM
buffed off
Looks flippin' great! Good tips guys, thanks. Now this means I gotta try all sorts of different combos this way!

 

[BILL]

Here's what I just tried, I think its similar to what Killr was saying above...
For my second coat of Souveran (just on my hood, my go to trusty test panel of choice.)

ME TOO.........THE HOOD IS MY TEST SITE.....:cheers:


spritz of CM to foam pad

OK DONE THAT.......BEEN THERE

spritz of CM on hood

BEEN THERE OK

Spritz of cold water on hood


THATS NEW..:cheers: ..... SPRITZ ON TOP OF THE C.M??
applied Soverand and worked in

OK THATS WHAT I DID PREVIOSLY WITH JUST C.M.


waited a few moments, spritzed hood lightly with CM

THAT'S NEW.......THAT WOULD BE THE SECOND SPRITZ OF C.M.




buffed off

BY HAND I PRESUME.....



Looks flippin' great! Good tips guys, thanks. Now this means I gotta try all sorts of different combos this way!

I AGREE.......:awesome: MY WAY WAS SPRITZ C.M. THEN APPLY SOVERAN

KILLR'S WAY WAS APPLY SOVERAN AND THEN BEFORE SHE FLASHS SPRITZ C.M. I DID BOTH AND THE RESULTS WERE THE SAME AWESOME

NOW I'LL ADD THE COLD WATER AND SEE WHAT THAT DOES

THANKS SCOOT........sorry for the upper case letters

great idea...........tomorrow test day:cheers: :cheers: