Curved Edge Pads

ZiggyPopp

ZiggyPopp

New member
Joined
Jul 30, 2014
Messages
42
Reaction score
0
With all the info available online, I don’t see much info on using curved pads on a rotary. Are these for pros only? I have such a hard time getting my DA polishers to keep spinning in the convex curves of some cars with side panels like an Audi A5 so I thought I would try these. I have a few of the lake country curved edge gold pads and the first time I tried to use them ended in frustration really fast. Using the flex pe14. Thanks.


CCS 7.5 foam pads, lake country 7.5 inch pads, 7 inch ccs foam pads, ccs pads by lake country, lake country mfg, lake country manufacturing


Sent from my iPhone using Tapatalk
 
Isn't the whole premise behind the curved edge pads just that the pad protects the backing plate so you can tilt the buffer into tight places? I don't use a rotary, but we use the LC Hydro Force pads on forced rotation buffers. They also have a curved edge.
 
The Flex 3401 will work on curved panels with ease. I do believe that Rupes and Makita now have a Forced Orbital Rotation DA. I would look into this if you do a lot of detailing. If not, the pads as well as technique are the only other options. I know how you feel! I have a Pc7424XP and worked on a Porsche and it was a challenge. That was the car that made me upgrade to the Flex 3401 years ago. I have now delegated my PC7424XP as my Mini-DA and sealant/wax applicator.

But let us know how your results come out with what you are going to do.
 
I have little experience with rotaries or those pads, but it may help others to help you if they knew what was frustrating about them.
 
Most likely frustrated trying to use a rotary without a lot of experience versus actually being frustrated with the pads.
 
In my experience using that large a pad on a random orbital is less than desirable, both in reaults and user experience.

This again illustrates my affinity for the green Buff and Shine foam. It will contour, and it has some bite.

Meguiar's Microfiber cutting disc and Buff and Shine Uro-Fiber pad might work too, because the interface foam is soft enough to contour as well.

The best spin I've experienced comes from the Lake Country Hydrotech line.
 
ZiggyPopp said:
With all the info available online, I don’t see much info on using curved pads on a rotary. Are these for pros only? I have such a hard time getting my DA polishers to keep spinning in the convex curves of some cars with side panels like an Audi A5 so I thought I would try these. I have a few of the lake country curved edge gold pads and the first time I tried to use them ended in frustration really fast. Using the flex pe14. Thanks.


CCS 7.5 foam pads, lake country 7.5 inch pads, 7 inch ccs foam pads, ccs pads by lake country, lake country mfg, lake country manufacturing


Sent from my iPhone using Tapatalk
Click to expand...

If you were trying to do any correcting I can understand you being frustrated, the gold pads are almost always Jeweling pads..
 
sudsmobile said:
Most likely frustrated trying to use a rotary without a lot of experience versus actually being frustrated with the pads.
Click to expand...

Yes you are correct. I use my rotary only for jeweling with menz 3800 so limited experience for sure with only flat pads.

I think these pads would work better for me if I were to use a flexible backing plate which I do not have.


Sent from my iPhone using Tapatalk
 
You must log in or register to reply here.
Back
Top