amj4533sac
New member
- Jun 1, 2012
- 15
- 0
About to work on a black C300 this weekend and really only wanted to do a 1-step.
For compounding purposes I have typically been using 5.5" Surbuf pads loaded up with M105 (D300+M105 if M105 is dusting too much on it's own).
I definitely will not need the Surbuf pads on this one so I was curious if Megs Microfiber cuttings pads with D300+M205 will finish down any better than D300 by itself.
I most likely will end up using BF GEP to prep and BFWD as the LSP
I know this is typically a 'paint-by-paint' situation but wanted to put it out there and see if these two have been combined before!
If not, I'll try to grab some pictures and let everyone know how it goes...
For compounding purposes I have typically been using 5.5" Surbuf pads loaded up with M105 (D300+M105 if M105 is dusting too much on it's own).
I definitely will not need the Surbuf pads on this one so I was curious if Megs Microfiber cuttings pads with D300+M205 will finish down any better than D300 by itself.
I most likely will end up using BF GEP to prep and BFWD as the LSP
I know this is typically a 'paint-by-paint' situation but wanted to put it out there and see if these two have been combined before!
If not, I'll try to grab some pictures and let everyone know how it goes...