Decision making

  • Thread starter Thread starter Moldavite
  • Start date Start date
M

Moldavite

Guest
Hi to all Pros

i planning to get a few stuff and narrow down to few items:
i wash my car twice a week , car is park under shelter but not garage.


2 car i current own:
light green toyota with interior full beige & fabric seat
black c250 with beige leather seat black trim,carpet dash etc

and product i have:

Meguiars:
ultimate polish
plastx
ultimate protectant
water spot remover
scratch x 2.0
express wash& wax D115
All purpose cleaner D101 (running low)
Ultimate quik detailer (running low)
Quik interior detailer (running low)


Chemical guy:
All clean+ ( running low)
Mr pink
Citrus wash and gloss
Silk shine

others:
collinite 845
Glass Cleaner

thinking to add:
Collinite 915 , 476
Duragloss Aquawax
Chemical guy sprayable leather
Chemical guy Stripper scent
Chemical innerclean
Chemical speed wipe

blackfire wet diamond or opti seal

Optimum Power clean or meg super degreaser D108

Optimum protectant or
Ultima interior Guard plus(UIGP) or
303 Aerospace
(plan to use on dash door trim leather seat)
:confused:

Flex3401 or DA
Menzerna FG400/4000/powerlock
Da microfiber system

*i did tried a rotary (makita) few time last year, helping my friend polish his hood , roof :)

any suggestions are most Welcome :xyxthumbs: Feed back please
 
I use 303 protectorant and cloth finishes and pbl leather and vinyl protectorant and all other surfaces.

I can also recommend the pbl interior coating as well
 
I would bypass the DA and go straight tot the flex if money is not an option. You will move to the flex as it is inevitable.
 
Thanks for reply romach
How you like the 303AP?
Any luck on leather seat?
As for the Protector or coating,
I can only access to
Ultima interior guard and 303 AP or optimum protectant. I try to avoid shipping from overseas(expensive customs tax and shipping cost)
 
Eandras appreciate the tips :)
I heard a lot good things about flex3401
So is hybrid pad + menzerna polish combo better option?
I also plan to apply LSP with it
 
Moldavite said:
Eandras appreciate the tips :)
I heard a lot good things about flex3401
So is hybrid pad + menzerna polish combo better option?
I also plan to apply LSP with it
Click to expand...

I have a 3401 and for me the MF pads work best. I also have several LC flat foam pads and some hexlogic pads that work in a pinch.

I've never used Menz but I've heard great things about it. I did a full correction yesterday with an MF cutting pad and CG V34 - worked great. M101/M105 dust too much for my taste and can be challenging to wipe off..... but they work fairly well also for correcting.
 
thanks for reply Mach1USMC :xyxthumbs:
can you share more on MF pad /backing plate size etc
i heard M101 create low dust compare to M105 and finish better to near lsp ready.(ihaveacamero's review)
i also considering CG V series 32/34/36/38
 
af90 said:
CQuartz Fabric and Leather Coating.

Only issue it needs drying time or to be heat dried. Works great though.
Click to expand...

there's a shop near me carry them, will check out soon
thanks af90 :dblthumb2:
 
Moldavite said:
thanks for reply Mach1USMC :xyxthumbs:
can you share more on MF pad /backing plate size etc
i heard M101 create low dust compare to M105 and finish better to near lsp ready.(ihaveacamero's review)
i also considering CG V series 32/34/36/38
Click to expand...

I have 5.5 inch backing plate and 6 inch pads. I have both MF cutting and polishing pads. 1 set from CG and the other set from AG. (LC maybe? I'm not sure of the brand) And a boatload of Foam pads, mostly Hexlogic.

101 definitely dusts less than 105 - but they both can be finnicky to remove. They cut faster than V32/V34 from CG but the CG stuff dusts WAY less and removes much much easier. I've done dozens of details with both lines with great success - but I'm always game to try something "New and Improved":xyxthumbs:

I'm going to get some Menz FG400 and HD Cut because I heard they cut like M101 but don't dust as much and are easier to remove.
 
Mach1USMC said:
I have 5.5 inch backing plate and 6 inch pads. I have both MF cutting and polishing pads. 1 set from CG and the other set from AG. (LC maybe? I'm not sure of the brand) And a boatload of Foam pads, mostly Hexlogic.

101 definitely dusts less than 105 - but they both can be finnicky to remove. They cut faster than V32/V34 from CG but the CG stuff dusts WAY less and removes much much easier. I've done dozens of details with both lines with great success - but I'm always game to try something "New and Improved":xyxthumbs:

I'm going to get some Menz FG400 and HD Cut because I heard they cut like M101 but don't dust as much and are easier to remove.
Click to expand...

FG400 is glorious, zero dusting, cuts similar to M105 but finishes much better. On most cars it can easily be a perfect one-step and LSP ready.

I haven't used HD Cut only Adapt and Polish.
 
since menzerna is well recommend by all i might take a shot :xyxthumbs:

if use FG400 follow by SF4000 then powerlock + collinite915
PF2500 for maintain etc
does this sound good?
 
Moldavite said:
since menzerna is well recommend by all i might take a shot :xyxthumbs:

if use FG400 follow by SF4000 then powerlock + collinite915
PF2500 for maintain etc
does this sound good?
Click to expand...

Once you do the two step with FG400 and SF4000 you should be able to maintain it for the most part with just SF4000.
 
Ultima interior protector+
Optimum protector+
303 aerospace

which of the above give a light sheen?
and what's your favourite Feed back please
 
Moldavite said:
since menzerna is well recommend by all i might take a shot :xyxthumbs:

if use FG400 follow by SF4000 then powerlock + collinite915
PF2500 for maintain etc
does this sound good?
Click to expand...

I've tried PF2500 on the orange LC pad to cut followed by SF4000 on a white LC pad to jewel and sealed with Menz PL and topped with 915, the results were spectacular. Before you top the 915 let the PL cure for 24 hours or more, analyse the shine under different light and angles, then top with 915 and do the same, post your findings after ;-)
 
Zubair said:
I've tried PF2500 on the orange LC pad to cut followed by SF4000 on a white LC pad to jewel and sealed with Menz PL and topped with 915, the results were spectacular. Before you top the 915 let the PL cure for 24 hours or more, analyse the shine under different light and angles, then top with 915 and do the same, post your findings after ;-)
Click to expand...

Thanks will definitely tried that out once i source everything :dblthumb2:
 
You must log in or register to reply here.
Back
Top