Detail: 96' Cobra (hammered) White Paint
- Thread starter ReLoaDeD BuLLiTT
- Start date
ReLoaDeD BuLLiTT
New member
- Dec 8, 2007
- 142
- 0
- Thread starter
- #23
just finished my 2nd coat of poli-seal...topping it off with s100.Wow that paint was jacked up! Good job getting it clear. I bet your muscles are glad its done
Get some LSP! I'm anxious to see some sun shots!
sun shots will come either tomorrow or this weekend!ReLoaDeD BuLLiTT
New member
- Dec 8, 2007
- 142
- 0
- Thread starter
- #24
Over the years, all sorts of mold, grime and dirt accumulated and was caked on the hinges and the jams. With some good old fashioned elbow grease with an old clean rag and some Meguiars All-Purpose Diluted and a toothbrush, I was able to get the jams/hinges looking almost brand new! :thumbsup
Driver's Side Door Jam Before:
Driver's Side Door Jam After:
Driver's Side Door Hinge Before:
Driver's Side Door Hinge After:
Passenger Door Hinge Before:
Passenger Door Hinge After:
Passenger Door Jam Before:
Passenger Door Jam After:
All jams were dressed with S100 wax
Driver's Side Door Jam Before:
Driver's Side Door Jam After:
Driver's Side Door Hinge Before:
Driver's Side Door Hinge After:
Passenger Door Hinge Before:
Passenger Door Hinge After:
Passenger Door Jam Before:
Passenger Door Jam After:
All jams were dressed with S100 wax
ReLoaDeD BuLLiTT
New member
- Dec 8, 2007
- 142
- 0
- Thread starter
- #25
The interior of the car was actually in much better shape than the exterior. Only took me 45 minutes to wipe everything down and protect it. I plan on doing the seats tomorrow. Dressed all trim/dash pieces with 303.
Without further delay...here's some finals of the exterior of the car! Thanks to those who stuck around to see it! (I know white's pretty boring).
Lastly, I forgot to list this pic of the rag after I cleaned the door panels...man they were nasty.
Without further delay...here's some finals of the exterior of the car! Thanks to those who stuck around to see it! (I know white's pretty boring).
Lastly, I forgot to list this pic of the rag after I cleaned the door panels...man they were nasty.
nrengle
New member
- Oct 7, 2007
- 618
- 0
Dude is there any clear coat left after 5 passes of Powergloss and 10 of M105 on the roof? OUCH! I probably would've wet sanded the whole car instead. Nice turn around though! I'd see about ordering up some Opti-coat after all that to really seal that great finish in for a while (IE a year plus).
ReLoaDeD BuLLiTT
New member
- Dec 8, 2007
- 142
- 0
- Thread starter
- #27
I did wetsand the hood and roof. Still required 5 light passes to remove all remaining RIDS. I'm very anal. Going to see what the hype is about when I get my Blackfire Wet Diamond, and go from there.
ReLoaDeD BuLLiTT
New member
- Dec 8, 2007
- 142
- 0
- Thread starter
- #29
I got it Jan 1st for an even trade for my Mountaineer. 74k miles are on the body, and 24k miles on the new motor. :xyxthumbs:
02blackout
New member
- Jan 31, 2009
- 203
- 0
You took the entire decklid off hahahaha. Nice work man.
ReLoaDeD BuLLiTT
New member
- Dec 8, 2007
- 142
- 0
- Thread starter
- #31
haha i had to man...to paint the trunk area
I see you're from memphis, my entire family's from shelby county...go vols!
cutcliffe is new head coach as of today
02blackout
New member
- Jan 31, 2009
- 203
- 0
I live in Shelby County, too. Germantown/Collierville/Cordova area! I'm in the middle of like all three haha.
I'm SO ready to get out of here for college, though.
I'm SO ready to get out of here for college, though.
ReLoaDeD BuLLiTT
New member
- Dec 8, 2007
- 142
- 0
- Thread starter
- #33
any interest in going to UT?