Detailed:2001 Civic SI

justin_murphy

justin_murphy

New member
Joined
May 7, 2006
Messages
2,852
Reaction score
0
This is one of my best friend's rides. Been storage for about a year. Wasn't that bad since he takes care of his cars.

Meguiar's NXT Tech Car Wash
(Clayed while washing)

Meguiar's #9 Swirl Remover 2.0
(EDGE 2K Green Pad at #5)
More cut with this than what you would think. One of the only Meg's products that I've had luck in the sun with. Not dusting either.

 Meguiar's XMT Tech Wax-2 coats
(EDGE 2K White Pad at #3)
Simply one of my favorite pads to use. Wax stays right on the outter edge of the pad. A littel of NXT goes a long way once the pad is primed. NXT really made the Electron Blue pop.

100_0738.jpg

100_0742.jpg

100_0743.jpg

100_0744.jpg

100_0746.jpg

100_0747.jpg

100_0751.jpg

100_0753.jpg
​
 
Last edited:
Meg's Shampoo Plus, #9, NXT Tech Wax (2 coats with 30 min. drying intervals).
I love #9. You just have to use the right amount and takes some time to break down. Then it becomes a nice polish. Gonna go back and top with #26 Yellow Wax this week.
 
justin30513 said:
Meg's Shampoo Plus, #9, NXT Tech Wax (2 coats with 30 min. drying intervals).
I love #9. You just have to use the right amount and takes some time to break down. Then it becomes a nice polish. Gonna go back and top with #26 Yellow Wax this week.
Click to expand...

That tech wax NXT is really i think underated ....i've used it and loved it, but i notice on other forums that its not that popular......i have the spray tech also......:)
 
nice clean looking ride.......love the blue. Funny, I just noticed he has a matching Maglite in the door pocket;-)
 
BILL said:
That tech wax NXT is really i think underated ....i've used it and loved it, but i notice on other forums that its not that popular......i have the spray tech also......:)
Click to expand...

I'm finding out that NXT is more of a sealant than just a wax. That's why I'm topping it with #26 now. The NXT Spray Wax is a booster. You can't just use it by itself.

2 coats of NXT is very important. Also looks twice as good the next day after it cures out.
 
I thought NXT had some cleaners in it? How can you do two layers if there are cleaners?
 
abrcrombe said:
I thought NXT had some cleaners in it? How can you do two layers if there are cleaners?
Click to expand...


When you talk “wax,” you’re actually talking protection. Tech Wax, a synthetic, scientifically engineered paint sealant, is an alternative to traditional wax. The benefits of a paint sealant are many. Fool-proof, fast, easy application, longer lasting, equivalent protection! If you prefer the appearance of a wax (said to be a glossier, wetter, richer appeal) but like the durability of a sealant, you can layer a wax over a paint sealant. Pinnacle Souveran or Signature Series II will give you most outstanding results over Tech Wax. Meguiar’s does not recommend layering Tech Wax over another sealant or wax. It has slight cleaning properties, negating the effect of the sealant rather than adding extra protection or improving the visual effect.

2 COATS FOR COVERAGE........ ........
 
abrcrombe said:
How do you get it done then Justin? You must be a magic man!:p
Click to expand...

LOL!!!

  1. I use a swirl remover. #82,#80, #9 etc. Usually with EDGE 2K Yellow pad set at #5.
  2. Next, I use a glaze, if needed, like #7 or #3. I normally skip this step if I use #80, it has polishes and oils built in. Also only do this if the customer is wanting to pay for this extra step. I charge 50.00. I like to use EDGE 2k Blue pad set at #3.
  3. I top the 2nd step with 2 coats of NXT Liquid Tech Wax. I use the EDGE 2K White Finishing pad since it lays down and nice THIN coat. I let the first coat sit and dry for 30 minutes remove by hand. Here's a MUST for NXT. 2nd coat, let dry for 30 and remove by PC (G-100 in my case) with MF bonnet set at #5. This where I get a major color depth.
  4. For the ultimate protection and POP, I finish up with coat of #26 Yellow Wax. This is the best 10 bucks you'll ever spend. Using the EDGE 2K White Pad again (they are 2 sided!!!), I lay it down with a #3 setting letting it work into the paint. I let dry for ONE hour and remover with a MF bonnet at the #5 setting. I now finish up with a Final Inspection wipe-down.
Thanks guys.
Hopes this any good to you.

Justin
 
Very nice! How do you persuade them that a glaze is worth 50 bucks?! And what we were wondering is, since NXT has cleaners, doesn't it clean the previous layer that you just laid down? 2 sided edge pads sound VERY nice.
 
You must log in or register to reply here.
Back
Top