Does a foam gun cut down on time?

Bill1234

Bill1234

New member
Joined
Apr 22, 2012
Messages
2,647
Reaction score
0
I have been doing a small amount of work on the side, I have been working on heavily soiled cars that have never been washed, usually crossovers. I have a couple of questions
I have a hose , not power washer
I have been using a montana boars hair brush
will it work with regular car soap?
should I get one in general? I dont know if it would be worth it to get one to same time
 
I think there was a thread on this topic just the other day. It probably adds more time since its an extra step. The benefit is if you let the foam dwell on the car for a few minutes it will make the next step of hand washing easier since it will break down the dirt on the car. I started using a foam cannon a few months ago and I like it. Its maybe an extra few minutes. I have a quick release on my pressure washer so I take it off rinse then hand wash :props:
 
Just used my foam cannon for the first time the other night. If you put the soap on really thick like shaving cream that you've seen on some videos, you'll go through a lot! I almost went through my whole liter of Iron X Snow Soap.

I then tried using the cannon with Meq's Gold Class Car Wash and was able to get it to foam up as well. Again - put it on real thick like shaving cream and went through about 1/4 of a gallon. I think you could use just about any car wash soap with the cannon and get it to foam. But how much product you'll use is probably dependent on the brand of soap.
 
It probably depends on how you use it and where.

I use the gun AS I'm cleaning the car, not as a pre soaker and I use 2 rinse buckets, but this is at my house. I would think as maybe as a mobile detailer it would take more time, but that's a guess because I don't travel to do details/don't have my own business.

Guns and cannons IMO help you get better results during a wash though, so its worth every penny to me.
 
Bill1234 said:
I have been doing a small amount of work on the side, I have been working on heavily soiled cars that have never been washed, usually crossovers. I have a couple of questions
I have a hose , not power washer
I have been using a montana boars hair brush
will it work with regular car soap?
should I get one in general? I dont know if it would be worth it to get one to same time
Click to expand...

I disagree that thick foam is helpful... If you ever watch
the video from Larry at Ammo NYC, you will see that a less
thick soap from the foam gun has the effect of the dirt actually
running off the paint. Will try to copy the link and post it here
if my IPad cooperates.

Just my 2 cents.
 
Lexi65 said:
I disagree that thick foam is helpful... If you ever watch
the video from Larry at Ammo NYC, you will see that a less
thick soap from the foam gun has the effect of the dirt actually
running off the paint. Will try to copy the link and post it here
if my IPad cooperates.

Just my 2 cents.
Click to expand...

Here's the link...very interesting IMHO!


Basic Car Wash | AMMO NYC
 
If the foam is just sitting on the car it's useless. You want it running off the paint like an avalanche taking dirt with it. I actually prefer a foam gun and a hose instead of a high pressure washer. HP washers don't put out the water volume that a hose will. It's about water volume and foam flowing OFF the paint, and not about thickness of foam.
 
silverfox said:
If the foam is just sitting on the car it's useless. You want it running off the paint like an avalanche taking dirt with it. I actually prefer a foam gun and a hose instead of a high pressure washer. HP washers don't put out the water volume that a hose will. It's about water volume and foam flowing OFF the paint, and not about thickness of foam.
Click to expand...

:props: :iagree:
 
I like to keep my foam gun on setting C and Meg's hyper wash is a great inexpensive foaming soap that cleans well too.
 
I watched the video he needs some wheel woolies and a Master blaster is way safer than his way of drying.
 
I just pulled up Chemical Guys video of foaming a car. I think my mistake was I didn't dilute it in the bottle as you can see at 1:18 in the video of him adding Mr. Pink to the cannon.

MR. PINK Super Suds Shampoo - Chemical Guys Car Wash FOAM CANNON - BEST CAR WASH EPIC FOAM - YouTube

I guess I got thrown off because the Iron X Snow Soap said on the bottle not to dilute if using a cannon. I should have diluted the Meg's Gold that I used I guess. Oh well...live and learn.

But as you watch the video, notice how thick he is putting it on. Also notice how fast he's going through the soap in the bottle. This was how I applied it and was my experience as well.
 
Foam cannons look like a whole lot of fun. Foam guns do a whole lot more work IMO
 
^ perfectly said. Again, its a large volume of water and foam flowing off the paint. Not a mountain of foam sitting there doing nothing but wasting time.
 
To me, it actually adds some time. If the car is heavily soiled with dirt, mud, etc. I will foam it, otherwise, 2BM is the way to roll. But the neighbors certainly look at me a little crazy when I'm foaming up a car.
 
What is the maintenance on the pressure washer? And how much do you spend on gas to run it?

My neighbors have been noticing me, they think I'm crazy too lol, and I don't have the toys you guys have, yet :D
 
Bill you always do this ask for advice then never answer back.

Anyway the foam gun will add a step so common sense would dictate that's extra time.
 
The foam gun will amaze customers who haven't seen it yet. If your mobile it is an eye grabber and people will stop to ask you questions. I also like it at home as I can go crazy with it!!!
 
stilltipping3 said:
The foam gun will amaze customers who haven't seen it yet. If your mobile it is an eye grabber and people will stop to ask you questions. I also like it at home as I can go crazy with it!!!
Click to expand...

True statement. My neighbors come out and ask me so many questions when my car is just soaking in foam.
 
You must log in or register to reply here.
Back
Top