Dressing tires and trim

tw33k2514

New member
Joined
May 15, 2011
Messages
2,298
Reaction score
0
I am trying to figure out a good medium between cost and quality for dressing exterior trim and tires. I don't want the dressing to just vanish after some rain. But at the same time, I feel like as long as the UTTG lasts, it is not worth the cost. Does anyone have any suggestions?


Also I would like something that can be diluted if possible. As I am trying to make money here :hungry:
 
The best dressing for the money is Meguiar's Hyperdressing. Can be diluted up to 4:1, but most do 3:1. At 4:1 though, that's 5 gallons of dressing for under $40!

If you are wanting it to be diluted then it's water based so it will not last as long.
 
The best dressing for the money is Meguiar's Hyperdressing. Can be diluted up to 4:1, but most do 3:1. At 4:1 though, that's 5 gallons of dressing for under $40!

If you are wanting it to be diluted then it's water based so it will not last as long.
Good point. I just don't want my clients to feel ripped off because the rain took of the trim and tire dressing.
 
I know several detailers who use hyper dressing with very satisfied customers so don't x it out just because it's water based. There are a ton of dressings that are water based.
 
I really like the Griot's Garage Vinyl & Rubber Dressing . Nice clean look with out the fake shiny appearance.
 
I know several detailers who use hyper dressing with very satisfied customers so don't x it out just because it's water based. There are a ton of dressings that are water based.
Guess I will give it a shot. I do like the price.
 
Okay a couple of responses here. I absolutely LOVE megs HD 4:1 but in the tire area I just prefer PB Bold N Bright (I use the spray not gel) just slightly more than HD. In your case I would purchase HD (in fact if you want some ill give you a small tester amount.) Yes it might wash off a little quicker than some items, but from what I remembered PB BNB used to last me a good 3 or more washes, I don't remember how the Megs HD has been holding up (maybe that means I need to do a test). The other thing you could do, if megs HD isn't holding up to your standards during wet seasons, is purchase something like megs All Season Dressing and just use it in full form during those wet months. Or instead of that purchase the poorboys bold n bright and dilute it to your desire (I used to go 2:1)

Poorboy's World Bold N Bright 32 oz. Refill

Can it be diluted?

I just read the label on my bottle the other day, and it does say you can dilute it, but it doesn't give any recommended ratios, nor does it give a max ratio.
 
So that mean it dilutes 45058956908:1!!!!

Weird how it says that..kinda zero help at all.
 
I use PB Bold N Bright and I am very happy with it, leaves a nice finish doesn't sling if you don't put it on too thick. I haven't tried Meg HD so I can't comment on it.
 
I understand what your saying OP but once you have used UTTG its just hard to recommend something else for trim. As little as it takes and long as it lasts it is not an expensive product imo. If I must redeemed something cheap for trim I will definitely recommend Meguiars Ultimate Protectant.

http://www.autogeekonline.net/forum/product-reviews/33295-review-meguiars-ultimate-protectant.html

For tires I think DP is one of your best options but a couple coats of UTTG last sooo much longer than anything else.
 
Keep in mind as well that water-based dressing such as the Opti-bond Tire Gel will not harm paint and won't make your tires brown after it washes off and won't attract dust and dirt as easily.

I've had some bad experiences with solvent-based dressings where tires turn very brown if there's a thunderstorm the following day and it all gets washed off.
 
A lot of great products I need to try, Thank you for all the replies.
 
Autogeek does not carry it, BUT Adams Super VRT (Vinyl/rubber/tire) dressing is water based and polymer fortified. It looks , feels and acts just like a traditional water based dressing (easy wipe off of paint and glass, and no harsh solvents), but beads water as well as any of the leading waterproof dressings.

Its a fairly expensive product, but I absolutely love it and have been using it exclusively on my exterior trim and tires, as well as engine bay plastics. It doesnt streak, or run off in the rain no matter how hamfisted you are with your application. I apply it to my trim every 4th wash (once a month). And the trim stays dark and continues to bead water that entire time, so it may even last longer as long as its used in an area that is not constantly bombarded and touched (like tires).

Megs Ultimate protectant lotion is similiarly water based, but can streak and turn out looking unveven if you overapply it and dont buff it off. Its also not as user friendly. BUT, when used properly it is also a fantastic product, that is safe, looks good and is priced extremely well ! Autogeek sells the Megs ultimate protectant cream. They also sell the liquid spray version, which dry's faster and is easier to use, but its petroleum distillate based.

and a 3rd option which I hear works very well and is very user friendly is the marine version of Duragloss's rubber/vinly dressing.

1z vinly/rubber protectant is also water based and polymer fortified. very user friendly. its a 3 in 1, as it cleans, conditions and protects. I also like this product a lot, especially for door seals. durability and water beading will last you about 2 or 3 weeks , or 2 wash's.

so there yah go. Out of all of the products I listed the 1z is probably easiest to use and produces good results. The Adams is not my go to product though because of the finish it leaves and its durability.
 
Autogeek does not carry it, BUT Adams Super VRT (Vinyl/rubber/tire) dressing is water based and polymer fortified. It looks , feels and acts just like a traditional water based dressing (easy wipe off of paint and glass, and no harsh solvents), but beads water as well as any of the leading waterproof dressings.

Its a fairly expensive product, but I absolutely love it and have been using it exclusively on my exterior trim and tires, as well as engine bay plastics. It doesnt streak, or run off in the rain no matter how hamfisted you are with your application. I apply it to my trim every 4th wash (once a month). And the trim stays dark and continues to bead water that entire time, so it may even last longer as long as its used in an area that is not constantly bombarded and touched (like tires).

...

so there yah go. Out of all of the products I listed the 1z is probably easiest to use and produces good results. The Adams is not my go to product though because of the finish it leaves and its durability.

Just wanted to confirm your last sentence; Adams Super VRT is NOT your "go to" product? Your review comments were such high praise that for it to not be your "go to" product seems a contradiction. :confused:
 
Dear Friends

I see that Ultima's Tire & Trim Guard Plus is the crowd favorite. I wish I'd ordered it instead of Meguiar's High-Gloss Endurance Tire Gel, but the Meguiar's product just arrived today and I haven't had a chance to apply it yet.

Whatever my Honda dealer applied to the tires when we bought the van a month ago is great stuff. The van has been through four self-serve car washes and the tires still look great. They're not as glossy as they were when we drove the van home from the dealer, but they're still a nice, rich black.
 
Dear Friends

I see that Ultima's Tire & Trim Guard Plus is the crowd favorite. I wish I'd ordered it instead of Meguiar's High-Gloss Endurance Tire Gel, but the Meguiar's product just arrived today and I haven't had a chance to apply it yet.

Whatever my Honda dealer applied to the tires when we bought the van a month ago is great stuff. The van has been through four self-serve car washes and the tires still look great. They're not as glossy as they were when we drove the van home from the dealer, but they're still a nice, rich black.


The good new is, Endurance is good stuff.

And just an update since the thread is alive again. I have been using 845 on my trim with amazing results, and I have PERL I still need to experiment with also.
 
Back
Top