dsms
New member
- Dec 16, 2007
- 190
- 0
I had a loaner car from Mercedes in my garage for the last few days and I noticed how bad the finish was, especially on the hood. So I figured I'd do a full correction using Gloss It products, and write a review. Once again the results were amazing....
Couple sun shots showing lots of swirls and quite a few RIDS.
(I only worked on the hood of this car)
After a wash and clay...
Correction and finishing process:
Makita
Evolution cut w. 5.5" CCS orange light cut pad
Evolution cut w. 6.5" CCS green heavy polishing pad
Evolution polish w. 6.5" white CCS polishing pad
Evolution polish w. grey CCS finishing pad to jewel the finish
Gloss enhancer wipedown
2 coats of Gloss Finish w. the Flex and blue CCS final finish pad
Another gloss enhancer wipedown
After correction w. Evo cut
50/50 shot '
right side uncorrected left side corrected
Post polishing, No Gloss Finish was applied yet
The finish was perfect and finished after 1 hit with Evolution polish but I went back one more time to jewel the paint and ensure no holograms remained with Evolution polish and a black LC finishing pad.
Couple sun shots showing lots of swirls and quite a few RIDS.
(I only worked on the hood of this car)





After a wash and clay...



Correction and finishing process:
Makita
Evolution cut w. 5.5" CCS orange light cut pad
Evolution cut w. 6.5" CCS green heavy polishing pad
Evolution polish w. 6.5" white CCS polishing pad
Evolution polish w. grey CCS finishing pad to jewel the finish
Gloss enhancer wipedown
2 coats of Gloss Finish w. the Flex and blue CCS final finish pad
Another gloss enhancer wipedown
After correction w. Evo cut

50/50 shot '
right side uncorrected left side corrected




Post polishing, No Gloss Finish was applied yet






The finish was perfect and finished after 1 hit with Evolution polish but I went back one more time to jewel the paint and ensure no holograms remained with Evolution polish and a black LC finishing pad.
Last edited: