Equipment and product suggestions for 2014 chevy express

jmvar

New member
Joined
Jul 31, 2009
Messages
3
Reaction score
0
I have been out of the detailing world for years now. Reading through posts and searching shows me a lot has changed since I had my trusty porter cable buffer and box of optimum products. This is the extent of my detailing experience on a blue honda s2000.

I now have a 2014 chevrolet express in black that needs paint correction, polish, and protection. I hear the clear coat on these is pretty hard.

My plan was to buy a griots g9 and use some sort of ceramic coating product for protection.

Would greatly appreciate some suggestions on products to use for the supposedly hard clearcoat I will be working with. I am open to suggestions on a buffer as well if there is a better choice than the griots g9.

Thank you
 
Menzerna and Sonax offer excellent compounds and polishes that work great on hard clear coat surfaces. No problem working with a Griot's Garage G9 Random Orbital Polisher, but prefer their BOSS long throw polishers. You just need to match up the correct foam pads with the chemicals being used. After correcting the paint surface be sure to use a "Paint Prep Spray" before applying the ceramic coating. I personally like working with the Blackfire Pro Ceramic Paint Coating - Black Edition. It offers a longer working time and can last up to 5 years. I would recommend working indoors and have excellent lighting and plenty of clean microfiber towels on hand when coating a large vehicle.

 
Is this the only vehicle you plan to work on, or are you moving towards doing this beyond a personal level?

I’m thinking your thinking long throw?

That vehicle has ALOT of flat retail. It only vehicle I’d go g21. If others I’d still go g15 over G9


Sent from my iPhone using Tapatalk
 
I’m thinking your thinking long throw?

That vehicle has ALOT of flat retail. It only vehicle I’d go g21. If others I’d still go g15 over G9


Sent from my iPhone using Tapatalk
That is a great point for sure.
I was thinking of the investment of $$ more than anything...no sense on spending a lot of $$ on equipment and products if this is a one time deal.
If the van is the only project......a low budget polisher and some Meg's 105/205...a few pads would do the trick.....lol
 
That is a great point for sure.
I was thinking of the investment of $$ more than anything...no sense on spending a lot of $$ on equipment and products if this is a one time deal.
If the van is the only project......a low budget polisher and some Meg's 105/205...a few pads would do the trick.....lol
This will be for personal use for the 2014 express, and a 2011 nissan frontier.

I would certainly consider a longer throw machine.

Any concerns with my lack of experience with one?
 
Menzerna and Sonax offer excellent compounds and polishes that work great on hard clear coat surfaces. No problem working with a Griot's Garage G9 Random Orbital Polisher, but prefer their BOSS long throw polishers. You just need to match up the correct foam pads with the chemicals being used. After correcting the paint surface be sure to use a "Paint Prep Spray" before applying the ceramic coating. I personally like working with the Blackfire Pro Ceramic Paint Coating - Black Edition. It offers a longer working time and can last up to 5 years. I would recommend working indoors and have excellent lighting and plenty of clean microfiber towels on hand when coating a large vehicle.

Thank you for the suggestions. I will look into those products.

I do have an indoor space I can work in but I need to upgrade the lighting.
 
If you go with a longer throw than the G9...I'd stick with a 15...21 might be overkill
 
Menzerna and Sonax offer excellent compounds and polishes that work great on hard clear coat surfaces. No problem working with a Griot's Garage G9 Random Orbital Polisher, but prefer their BOSS long throw polishers....
Thanks Bobby, good to see you posting about how Autogeek can help the OP.
 
This will be for personal use for the 2014 express, and a 2011 nissan frontier.

I would certainly consider a longer throw machine.

Any concerns with my lack of experience with one?

I started with a g15. No issues with being new. Easy rule of thumb or to keep polisher moving. I d stick with the 15 with those vehicles


Sent from my iPhone using Tapatalk
 
This will be for personal use for the 2014 express, and a 2011 nissan frontier.

I would certainly consider a longer throw machine.

Any concerns with my lack of experience with one?

You'll get much better results using a rotary polisher and a wool pad.

I rarely run my polisher over 1500 (unless I'm getting very frustrated). I typically stay around 800.

Start on the center your hood until you get the hang of it.
Use firm downward pressure and hold onto to it like your riding a horse for the 1st time.
While polishing use slow arm speed and occasionally touch the paint to see how hot it is getting.
When you get to the edges reduce pressure.

If I can help further let me know
 
Back
Top