Festool Rotex - Anyone tried it?

Totoland Mach

Totoland Mach

New member
Joined
Mar 3, 2006
Messages
1,142
Reaction score
0
There are a couple of Autopia threads about this German product. Pricey, but the quality appears outstanding. I like the idea of going from a random orbital to a rotary (for the problem areas) with the click of a button.

Just wondering if any Auto Geeks have one and can give some opinions.



Toto
 
Last edited by a moderator:
reminds me of that two headed drill they sell on infomercials ... I stick with the PC and Hitachi.
 
You're right about not cheap! But, I've got a neighbor that's interested in buying my pc and some product for around $100. So, with that in mind and the fact that the Rotex has rotary capability...it might be the ticket.

If I get it, I'll be sure to post some opinions and pics.

Toto
 
well, the 2 in 1 is about 400, pc's are 100 and rotary is more like 200 i think. so its more cost effective to get 2 machines as far as i can see, but its a cool design.if the price drops, it seems like a great tool
 
I wouldn't trust myself with a rotary yet, maybe my ex-wife will let me practice on her car though:righton:
 
Maximum speed on that rotary is 660 RPM. That's not going to do much correction. Keep the separate tools.
 
Quick Review

Well, I received the unit today and here's a quick review. I will be using it on a BMW and Mustang this weekend, so it will get a better workout.

First, the unit comes with a very nice "Systainer" (I suspect it's System Container shortened).

Festool_Rotex_Systainer.jpg


Systainer Opened to reveal contents
Festool_Rotex_Systainer_Open.jpg


Next: the unit itself is very well balanced and ergonomicaly is much better than the Porter-Cable unit. Also, the velcro backing plate uses "very" heavy duty velcro.
Festool_Rotex_on_Side.jpg


I decided to try out the Rotex with Pinnacle XMT 1 on the Suzuki hood. The machine is a joy to use. The motor in this tool is very powerful as it can switch from random orbital to rotary and the speed settings are 1-6. I don't know the exact specs on the rotary side, but it's pretty decent and probably 1200-1500 speed range.

Here's a couple of finish reflection shots using XMT-1 and a quick spray of Crystal Mist.
Suzuki_Vitara_results_of_Festool_Rotex.jpg


Pretty decent for a much abused daily driver that sits outside 24/7
Suzuki_Vitara_Reflection_Results_Festool.jpg


All-In-All, the Festool is a Porsche compared to the Chevy Porter-Cable. Both do the job well. It's finely balanced, is much easier to use, quieter and has a quick change backing plate. I've got another plate on order so I can have a polishing pad on one and a finish pad on the other.

I'll get a better chance this weekend to put the machine through the paces with 2 cars to do.
 
I´ve ordered the Festool Rotex 125 FEQ (newest model), its the little brother of the shown Rotex150. Finest german quality product, but very expensive. I bought it last year end of december, before the german common taxes were grown up. Its about 400 Euro, 500 dollars in germany. But its worthy. Ive tried it only with the XMT Carnauba fin glaze and a grey LC-pad and it goes very very easy. After I applied a single coat of NattysBlue with a blue LC-pad. Great und such a easy way to polish.

img0065989889dj6.jpg



img0067ek3.jpg
 
Last edited:
Bulla2000: you'll enjoy the Festool. I use mine several times per week detailing BMW's at a shop, so it gets used often. One of the best uses is polishing BMW headlight lenses in rotary mode. I sand the lenses with 3000 grit and polish them back to as new condition.

Totoland Mach
 
Thanks for reply. I´m sure I´ll be very satiesfied with this high quality machine from my country (germany). But of course a PC would be very nice too.
 
Bulla2000: I don't see the need for a pc any longer. The Festool is a random orbit and a rotary, so it is 2 tools-in-1. I use a DeWalt rotary for large surface areas and the Festool for areas the rotary would be too cumbersome or too near plastic parts (BMW lower rocker panels, bumpers, mirror housings, etc).

I haven't used my Porter-Cable unit for 4 months and will probably keep it as a backup unit or to apply sealants.

Totoland Mach
 
ZoranC said:
Totoland Mach, do you ever with Rotex feel a need for different backing plate (whether smaller or flexible)?
Click to expand...

Yes. The Rotex comes equipped with a sanding backing plate that has soft backing material so it "gives". This is a good plate for compound curves or applying wax. I purchased their Polishing plate that is rigid and smaller in diameter and use it for most of my work.

Toto
 
I also have the extra polishing plate from Festool. Its a little bit smaller (only a few millimeters). But I dont need that in front of having the sanding plate. Its also good.
 
It sure comes in a fancy box! I guess to go with the fancy price. Sounds like it is a really good tool. I like the looks.
 
What do you guys do with the holes in the backinplate?

I used a Bosch RO before, and that became packed with polish dust behind the backing plate after some months. Its designed to suck air/dust trough those holes in the backing plate, and also used to cool the engine, so closing them isnt a good option is it?
 
Reddwarf: Yep, it does come with a very nice storage/carry case. The Festool is ergonomically so much easier to handle and control. Like I said, it's the Mercedes of the sanders that have been used for auto detailing.

Truls: Only the sanding plate has the holes. They are used with the sanding pads on wood and will suck dust into the holes and route that to an optional vacuum attachment. I had a demo of that at the distributor and he sanded a block of wood with zero dust!

The polishing plate is a solid one with a velcro backing. The motor is a sealed unit, so the holes perform no cooling function.

All-in-all, it's one of the best purchases I've made for a detailing tool.

Toto
 
Its where i did it wrong then, i used the backingplate with holes for polishing, and that was a bad idea.
 
Totoland Mach said:
You're right about not cheap! But, I've got a neighbor that's interested in buying my pc and some product for around $100. So, with that in mind and the fact that the Rotex has rotary capability...it might be the ticket.

If I get it, I'll be sure to post some opinions and pics.

Toto
Click to expand...

So Toto do you think it's worth the extra money. The cheapest I have seen it is $430.00 including shipping without the polishing plate and pads. My Dewalt rotary is so load if I use it for a couple of hours my ears ring for another couple of hours. I have some furniture I also want to refinish and was thinking about getting a new sander.
 
You must log in or register to reply here.
Back
Top