Finishing pad soaking up product...

[TH3M B0N3Z]

I have a Lake Country black finishing pad that I use for my Chemical Guys glaze and man... does it suck product up like a vacuum. Part of it is my fault because I did use quite a bit of the glaze, but the pad itself seems to soak it up so much that it almost forces me to use more product. Is there a way to remedy this or something? If I add an adequate amount of product, it'll eventually seem to go dry, thus needing more product. But it's like the more I add, the more the pad soaks up. I rinsed out the finishing pad when I was done glazing my car and I swear I squeezed out about 2 to 4 more nickel-sized amounts. I put it back in the bottle, lol.

So is this all operator error or does my LC pad just soak up too much?

 

[spiralout462]

I found the blue to soak up a little but not the black. I guess it could be operator, or product, or a combo. I guess thats why Hydrotechs are so popular around here.

 

[Johny B]

How to prime a foam pad when using a DA Polisher

Hope this helps.

 

[swanicyouth]

That's one of the reasons I don't use a machine for glazes and sealants - IMHO too much gets wasted in the pad. I'm pretty impressed in how fast you can spread out liquids with a Polishin' Pal and a 3.5" pad.

You may want to try Hydrotech pads. Closed cell structure should keep more product on the surface - or that's the theory.

 

[TH3M B0N3Z]

That's one of the reasons I don't use a machine for glazes and sealants - IMHO too much gets wasted in the pad. I'm pretty impressed in how fast you can spread out liquids with a Polishin' Pal and a 3.5" pad.

You may want to try Hydrotech pads. Closed cell structure should keep more product on the surface - or that's the theory.

I have the trio of Hydrotech pads, but I use the red one for my Menzerna sealant and I didn't want to put the glaze on my dedicated sealant pad. Maybe I'll just order another red HT pad. It soaks up a little bit of the sealant, but nowhere near as much.

The only wax I can spread out easily by hand is carnauba wax. With sealants, they're so sticky and stronger, my hand start cramping something terrible. Once I started waxing/sealing with the PC... I quickly became spoiled, lol.

 

[mwoolfso]

that's one of the reasons i don't use a machine for glazes and sealants - imho too much gets wasted in the pad. I'm pretty impressed in how fast you can spread out liquids with a polishin' pal and a 3.5" pad.

absolutely!

 

[RLucky82]

What I do is on the last couple of panels, I stop adding product and just squish the pad down on the panel and that releases enough to finish the car

 

[TH3M B0N3Z]

What I do is on the last couple of panels, I stop adding product and just squish the pad down on the panel and that releases enough to finish the car

Yeah, I actually noticed that once before. I probably could have waxed my car halfway around again with what was left in the pad, lol.

 

[briamonto]

That's one of the reasons I don't use a machine for glazes and sealants

 

[cardaddy]

That's one of the reasons I don't use a machine for glazes and sealants

And I see some others don't as well.
OTOH Megs 21 for instance says to use a machine, even gives speeds for a rotary. :dunno: I've done it without but like it a lot better with. It's not the soaking up that kills me, it's trying to wash the darned thing! :laughing:

 

[CM8 6MT]

That's one of the reasons I don't use a machine for glazes and sealants

Like any other product you have to know how to use it. I use a machine to apply everything, work smarter not harder

What I do is on the last couple of panels, I stop adding product and just squish the pad down on the panel and that releases enough to finish the car

I agree, this method works well especially on a properly primed pad.

 

[cardaddy]

Like any other product you have to know how to use it. I use a machine to apply everything, work smarter not harder



I agree, this method works well especially on a properly primed pad.

:iagree:Nothing like 2 coats of M21 that I didn't have to get on my hands.