flex vs pc

So seems there is a higher vote for Flex over the PC....But as someone pointed out before...are there ANY other choices for backs on a Flex?

I personally need to get in smaller areas (ie-bumper openings/intercooler vents etc). I would NOT feel comfortable using the stock 5.5 plate with a small 4" pad...too high of a risk specially since Flex pulls or 'catches' a bit more than a PC right?

Im not opting to use a Lathe either (as Ive read before to decrease diameter of plate) so what is the smallest back available on the market?

Im most likely picking up a unit this weekend...despite all the PLUS + the Flex has over the PC, I do like the smaller size of the PC, and options of using a 4" Pad with 3.5" Back and even using some small brushes to work in carpet cleaning.

Also, is there a REAL diff between a PC and a UDM??

Thanks!! ;)
 
Last edited:
This is a great post, i'm very interested in everyone's opinions. I'm in the market to purchase either the flex or the PC and still can't decide. I"m no pro by any means, i want something that will work good in all situations and has quick change pads.
 
One reason the Flex seems to have more power is it is a direct drive, no clutch. As for the pads it usually comes with 7" pads thru ADS. The new meguiar's pads fit very nicely.
I would say if your doing more than waxing go with the Flex, if you can afford it. The Flex is twice the cost.
 
culinarian said:
One reason the Flex seems to have more power is it is a direct drive, no clutch. As for the pads it usually comes with 7" pads thru ADS. The new meguiar's pads fit very nicely.
I would say if your doing more than waxing go with the Flex, if you can afford it. The Flex is twice the cost.
Click to expand...

I started with a pc and it did a great job. I just purchased a flex primarily for speed but didn't try it yet. I'd say if the bug bites hard after you've done your first detail with a pc, then get a flex also at a later date. Craftsmen usually have more than 1 tool :buffing:
 
Auto Detailing Solutions (LINK REMOVED) has the Flex with a set of 6 pads and carrying bag for $309.00. Not a bad price at all.
 
Last edited by a moderator:
So when everyone is saying how safe this flex is how safe is safe? Can you adjust the forced rotation down quite a bit to tone down the cutting power?
 
Superdutytd said:
So when everyone is saying how safe this flex is how safe is safe? Can you adjust the forced rotation down quite a bit to tone down the cutting power?
Click to expand...
You cant adjust the forced rotation speed at all it is all controlled by the speed selector.
 
Oh so when you have the buffer at like 6k OPM it also does less forced rotation.
 
culinarian said:
Auto Detailing Solutions has the Flex with a set of 6 pads and carrying bag for $309.00. Not a bad price at all.
Click to expand...

Autogeek has a price match policy, and please no links to competitors sites per terms/conditions.
 
oski83 said:
So seems there is a higher vote for Flex over the PC....But as someone pointed out before...are there ANY other choices for backs on a Flex?

I personally need to get in smaller areas (ie-bumper openings/intercooler vents etc). I would NOT feel comfortable using the stock 5.5 plate with a small 4" pad...too high of a risk specially since Flex pulls or 'catches' a bit more than a PC right?

Im not opting to use a Lathe either (as Ive read before to decrease diameter of plate) so what is the smallest back available on the market?

Im most likely picking up a unit this weekend...despite all the PLUS + the Flex has over the PC, I do like the smaller size of the PC, and options of using a 4" Pad with 3.5" Back and even using some small brushes to work in carpet cleaning.

Also, is there a REAL diff between a PC and a UDM??

Thanks!! ;)
Click to expand...

Here is the Edge Flex adapter which gives you the ability to use what ever size edge pad you want .I have had one since first produced and love it.


Shop 3M: Edge E2K Flex Conversion Kit, EF08
 
Re: Time to Compounding

man_karat said:
Can somebody here advise me on when is the time to compounding my car? I admit just polish itself doesnt give a reflections like mirror even its fully swirl free. I had used Meg M105 with my flex before but cannot get the reflections like glass if i'm using a rotary with M105
Click to expand...

Generally you will not want to stop with M105, it is too aggressive. It does a fantastic job correcting swirling and other marring but does leave a slight haze on the paint as you point out.

What you will want to do if follow up with M205 and a softer pad. Which pad were you using with M105?
 
Re: Time to Compounding

remember a new PC is coming soon for those looking for something between the original PC and Flex.

HK2.jpg


HK3.JPG


HK4.JPG


HK5.JPG


HK6.JPG


HK7.JPG
 
Ive boiled down the PC argument to this.

Bottom line: Just cause it can do the job, doesn't make it the best tool for the job. I mean I could also drive a car with my feet if I wanted too, but it doesn't make it a good idea.
 
Re: Time to Compounding

killrwheels@autogeek said:
remember a new PC is coming soon for those looking for something between the original PC and Flex.

HK2.jpg


HK3.JPG


HK4.JPG


HK5.JPG


HK6.JPG


HK7.JPG
Click to expand...

If someone (like myself) already had a PC, wouldn't it be more beneficial to get the Flex instead of another newer and slightly improved PC?
 
Re: Time to Compounding

termigator said:
If someone (like myself) already had a PC, wouldn't it be more beneficial to get the Flex instead of another newer and slightly improved PC?
Click to expand...

the PC is no where near the Flex. i would keep the PC as you can use it for applying LSP's, getting in and around tight spots (with 4" pads), cleaning carpets, etc...
 
Re: Time to Compounding

BigAl3 said:
the PC is no where near the Flex. i would keep the PC as you can use it for applying LSP's, getting in and around tight spots (with 4" pads), cleaning carpets, etc...
Click to expand...

I would definitely keep my PC for liquid LSP's. I'm just wondering if the Flex is that much better than the my PC or should I just step up to a rotary. I'm leaning towards the Flex because I scared to death about a burning the paint on my beautiful cars with a rotary. On the other hand, the Flex is God-awful expensive.:eek:
 
You must log in or register to reply here.
Back
Top