Full detail on my Jeep this weekend

M

muscle

New member
Joined
Sep 7, 2011
Messages
104
Reaction score
0
I got my goodies in from last weeks sale. My plans are to start a full detail on my Jeep after work tonight. Below is my planned process. What do you think?

Interior:

  • Vacuum and blow out interior
  • It was recently shampooed
  • Wipe down all surfaces to remove megs ult protectant
  • Apply CarPro PERL to entire interior
  • Windows

Exterior:

  • Purple Power Wash to remove any remaining sealant
  • Scrub wheels
  • Clay paint if needed (this was already done about 4 to 6 weeks ago)
  • Clay rims
  • megs 105 on areas that previous correction (using meg ult compound) didn't get good enough
  • megs 205 on all paint
  • Purple Power Wash and check correction in full sun
  • BLACKFIRE Wet Diamond All Finish Paint Protection
  • wait 8-12 hours
  • Collinite #845 on all paint, door jams, and rims
  • Apply PERL to all external trim, tires, engine compartment
  • Windows
 
I think you pretty much nailed it now all you need is about 8 full hours and you'll have it finished!

Be careful with Purple Power on the paint. It's a pretty strong cleaner and can damage the finish if used undiluted and allowed to sit.
 
Last edited:
Sounds good, the only thing I would add is what Bobby mentioned.

Dilute the Purple Power if you plan on spraying it on any painted surfaces.
 
BobbyG said:
I think you pretty much nailed it now all you need is about 8 full hours and you'll have it finished!

Be careful with Purple Power on the paint. It's a pretty strong cleaner and can damage the finish if used undiluted and allowed to sit.
Click to expand...

I was going to do a 10:1 solution on paint and 5:1 on wheels.

I'm hoping to get the interior done today. Maybe even the engine compartment. This way I can focus on the exterior tomorrow.
 
CaneMustang said:
Make sure you take PICS!!!
Click to expand...

I will. It's already in good condition now as I did a correction with megs ult compound, colorx, and ult wax a few weeks ago. I want to take it to the next level. Over the last few weeks, I've been slowly getting the engine compartment clean. Now it's about ready for PERL.




Thanks, everyone!
 
You must log in or register to reply here.
Back
Top