Getting ready to buy a steamer.

D

DetailDrivenEugene

New member
Joined
Jul 13, 2015
Messages
165
Reaction score
0
I am getting ready to purchase a steamer, and would like some input from the autogeeks.

I would like to keep this as close to $600 as I can, but can put off purchasing a ptg to put more toward the steamer. I am part time at the moment, but pushing to grow. I am looking for a unit that will do engine bays, doorjambs, and interiors.

Is the dupray one enough to take on these tasks on a part time basis? Is there a big enough difference between it and the plus to justify the expense? Or is there a machine in the same price range that is better?

Just looking for some feedback from those who use these units, so I don't end up disappointed.

Thanks in advance!

B
 
Almost 100 views, and no one has one of these? How bout the vx 5000? More than I wanted to spend, but seems like a unit that will do what I need it to............
 
Everyone has there preference on different tools and techniques which is cool.Ive been detailing since 1989 and I can tell you save the 600 dollars yes a steamer may help you in some situations like letter removal carpet stains etc.I can't get see how your gonna steam a dirty engine or do a interior ,let's say you have 4 hrs to detail a car for 150 to 180 your gonna waste so much time with that,get a good pressure washer effective products and invest in a hotwater extractor,don't get me wrong a steamer is effective but not to detail jams engine interior wheels ,keep it simple.
 
Just got a dupray one plus. I got it mostly for around the house. If u call dupray sometimes they have demo units for a discount with full warranty.
 
I agree with GSKR. a pressure washer is what you want for door jambs, engines, etc. I really like my steamer for interiors. But you can use them on the exterior also. Whichever works best for your situation.
 
I have a pressure washer, but am hesitant to soak an engine on a newer car with it. 5% water vapor steam seems like it would be way less risky
 
you should stay a way from engines period. I don't mess with them at all,I can't tell you the last time I did one.The only decision I will make is to have a customer sign off that I will not be responsible.If you get the maf sensor or coil packs wet there goes your profit ,to much to cover up and a majority of customers don't pay extra for that service ,even if you charged a extra 120 not worth it.Steamer may be safe to do on a new car but it's to tedious and make sure you charge separate for engine cleaning or classic car engine detailing good luck on your new business congrats.
 
Most newer cars are mostly big pieces of plastic under the hood. I would be more worried about using a pressure washer on a older car. Just keep the tip a good distance away and you should be fine.

Steamers have 50-100 psi. They can force moisture into places also. Its totally up to you and what you feel comfortable doing.
 
correct anything over 60 to 70k mileage is a problem zone,Cadillacs are the worst.You are right about feeling comfortable ,you will get that gut feeling of yey or ney,I pass all the time the cost to fix the easiest problem will far exceed the profit on the detail that's just me,I worked at a mb dealer for 9 years and had my fair share of engine washing disasters,was working on a s430 got one of the sensors wet 3500 to fix we all learn from mistakes and hope people will listen,stay away from engines.
 
GSKR said:
correct anything over 60 to 70k mileage is a problem zone,Cadillacs are the worst.You are right about feeling comfortable ,you will get that gut feeling of yey or ney,I pass all the time the cost to fix the easiest problem will far exceed the profit on the detail that's just me,I worked at a mb dealer for 9 years and had my fair share of engine washing disasters,was working on a s430 got one of the sensors wet 3500 to fix we all learn from mistakes and hope people will listen,stay away from engines.
Click to expand...

He's right how much Is a engine cleaning worth to a customer ?

20 bucks ? The potential damage you can cause could cost you hundreds of dollars. To make 20 bucks.

Not worth it. The customer isn't going to over value that service anyway
 
I have shied away from engines for the exact reasons that you guys mention.

Been at this for businesses and myself on the side for over 15 years. I have decided to stop putting money in other people's pockets, and try to make a go on my own.

After researching steamers for a while, it seemed like they would be a worthwhile investment. I am starting to wonder if I am wrong. I have seen plenty of threads showing people using them on every surface in an interior, with great results.

I am in Eugene, OR., and thought the "green" aspect would appeal to the environmental types here, as well as speeding up some of the tasks I don't especially enjoy.

I really appreciate the input. That is why I keep coming back, the collective knowledge and experience is awesome!
 
GSKR said:
Everyone has there preference on different tools and techniques which is cool.Ive been detailing since 1989 and I can tell you save the 600 dollars yes a steamer may help you in some situations like letter removal carpet stains etc.I can't get see how your gonna steam a dirty engine or do a interior ,let's say you have 4 hrs to detail a car for 150 to 180 your gonna waste so much time with that,get a good pressure washer effective products and invest in a hotwater extractor,don't get me wrong a steamer is effective but not to detail jams engine interior wheels ,keep it simple.
Click to expand...

I have to agree. A great extractor and use a soft brush plus APC for the interior crevices and wipe dry...done. I bought one and regretted it since it took me longer messing with the machine than it was worth
 
You must log in or register to reply here.
Back
Top