Got a chance to use Poorboy's White Diamond w/one of our new Cross Groove pads!

Matt S.

Matt S.

New member
Joined
Jan 24, 2007
Messages
1,909
Reaction score
0
This was the night before Detail Fest...the Vette was looking...dare I say, rough? Meghan can attest to that!

The products

P1020435.jpg


After spreading the polish...looks kinda cool with that weird pattern on the pad, lol

P1020437.jpg


Here are some pics of the slick, wet look I got.

P1020441.jpg


P1020439.jpg



OK so I had to top it off with a wax obviously....and does it get any better than Signature Series II on silver? Im the MAN

P1020444.jpg


Got wetness?

P1020445.jpg


Personally this is the wettest looking combo I've seen on silver so far...it's rained really hard the past few days and it is holding up very well. I will keep you all posted on durability in the near future.

Also, this is how the Cross Groove pad looked after doing the entire car.

P1020457.jpg


I was expecting to need two pads....but this one held up very well. The grooves in the pad really helped in keeping the pad cooler, contouring around the sexy curves of the Vette, and best of all, the polish did not get all caked up.

White Diamond was very easy to use...it has a pretty thick consistency and did not separate like most other glazes do. As always, easy on/easy off, and the results speak for themselves. :)
 
Can you compare it to CK VM or RMG? I'd like to know what makes it specific for lighter colors cars (if possible) to all the other glazes out there?
 
I think VM is a little easier to use since it's more watery, but I do like the look of White Diamond more. I don't have any experience with RMG though.
 
This picture says it all! I have never used a single product to produce results like this on my Tacoma.

P1020439.jpg
 
That hood shot is SICK!
I've used RMG before, and it didn't look like that. Looks like another great addition to the Poorboy's lineup.
 
Awesome job! I wish I would have looked closer at it at Detail Fest!
 
Thanks guys...it's definitely a great combo for silver. Normally you can't get that kind of wetness without muting the metallic flake, but this combo definitely shines in both aspects.
 
Matt, how is the filling effect? Is the product kind of thick? Easy to buff off? What speed did you use the PC at to work it in and did you work in more as a light polish or a paint cleaner? Once it's spread and worked a little, is it good to buff off? Or did you find it needed to be worked in a long time almost until it was disappeared (similar to XMT 360).

Sorry for all the questions, but I'm really close on pulling the trigger for the "Black Hole" show glaze.
I've used VM and RMG in the past for glazes. I can't say I was disappointed nor extremely happy.

I'm looking for something to help fill minor buffing marks and very light marrings that might be on the car before waxing w/ Souveran. I don't want to do a light polish every couple months.

Thanks Matt.
 
Whitethunder46 said:
Matt, how is the filling effect? Is the product kind of thick? Easy to buff off? What speed did you use the PC at to work it in and did you work in more as a light polish or a paint cleaner? Once it's spread and worked a little, is it good to buff off? Or did you find it needed to be worked in a long time almost until it was disappeared (similar to XMT 360).

Sorry for all the questions, but I'm really close on pulling the trigger for the "Black Hole" show glaze.
I've used VM and RMG in the past for glazes. I can't say I was disappointed nor extremely happy.

I'm looking for something to help fill minor buffing marks and very light marrings that might be on the car before waxing w/ Souveran. I don't want to do a light polish every couple months.

Thanks Matt.
Click to expand...

My car did have some very minor swirls here and there just from washing and whatnot the past couple months...White Diamond did take care of them. Not too sure if they were filled or removed (time will tell), but they are gone. The product is pretty thick and does not need to be worked in very long at all. It's not an apply/remove process, but the working time isn't as much as a swirl remover. I pretty much always use my PC on speed 6 unless I'm applying a wax. Hope this helps!
 
What was the prep on the Vette before you applied the WD? Looks great.
 
I had clayed and polished with Menzerna Final Polish 3 months beforehand. Otherwise, I just washed and used WD.

Thanks
 
now im kicking myself for not get some White Diamond when i did my order sunday...darn budgets
 
I'm sure you can live without it....at least until next time. :D
 
how does this compare to the other glazes offered by AG? Is this the best or are there others? I have a black car so I would get the black hole show glaze?
 
You must log in or register to reply here.
Back
Top