For those of you that have uarsed C4, how far does this product really go? I got contacted about a Jeep Rubicon with badly faded trim and was wondering if the 30ml bottle would be sufficient to coat all of the trim.
Also, any hints and techniques applying this stuff? I've used plenty of trim products but never this particular product. They are looking for a semi permanent solution.
Thanks! Feed back please
I would say, by comparing C4 to Carpro DLX, the Carpro DLX IMO seems to be a Ceramic Type "Coating" which seems to me to sit on top of the part treated.
C4 seems to be more than this I've found. This product seems to imbed, and permeate further into the part, becoming one with the part. The carrier solvent and this product seems more penetrating to me. In other words, this product seems more than "semi-permanent".
I would suggest to clean all parts previously with a good APC Cleaner, getting parts as good as they can look beforehand. I'd probably stay away from Alcohols, Prep Solvents, or other oddities like Naptha, or Paint Thinner to prep.
I've also foud with many of these types of products like Coatings, WOWA's, DLX, the lavish tendency to over apply.
As some other users would probably say, yes, the small bottle should be enough to treat all trim on something like the Jeep.
If in doubt, then prioritize what parts should get such treatments, and use something else for less important parts.
Mark