Harbor Freight Rotary Buffer

Thanks for the tip:dblthumb2:




just as most have done to the HF DA, i removed the OEM grease and added some Hi Temp(500*) Extreme Pressure grease from Sta-Lube made by CRC. $5 a tube at HF.
I also replaced the OEM phillips head screws with hex cap screws (M4x .70 x 14) Installed via 7mm socket or wrench.
IMO, less chance of stripping the head out next time I R&R the grease

If Charlie Sheen was a detailer ...Spinning! :xyxthumbs:
 
I'm still trying to make up my mind on which rotary I want to buy.
I had a Mikita that was stolen from the back of my truck so I bought the HF Electronic rotary.
Pros - Good power, well balanced, holds selected RPM's pretty good even with load.
Cons - Cheap unit, heavy, no throttle control, just an on/off switch.

I put a really good BP with good pads and works just fine, I miss my Mikita:(
Now I'm leaning towards the DeWalt, might as well wait until the holidays are over now.
Who knows what I'll buy:)[/QUOTE

Does yours fluctuate at low speed with no load? My buddy had one, and it wouldn't stay steady, it "idled" like an old Honda.

Sent from my SAMSUNG-SGH-I777 using AG Online
 
I'm still trying to make up my mind on which rotary I want to buy.
I had a Mikita that was stolen from the back of my truck so I bought the HF Electronic rotary.
Pros - Good power, well balanced, holds selected RPM's pretty good even with load.
Cons - Cheap unit, heavy, no throttle control, just an on/off switch.

I put a really good BP with good pads and works just fine, I miss my Mikita:(
Now I'm leaning towards the DeWalt, might as well wait until the holidays are over now.
Who knows what I'll buy:)[/QUOTE

Does yours fluctuate at low speed with no load? My buddy had one, and it wouldn't stay steady, it "idled" like an old Honda.

Sent from my SAMSUNG-SGH-I777 using AG Online

No it doesn't fluckuate at all.
As you l know it has a soft start, well more of a delay, I'm like come on let's go. Lol
I've had it for awhile now and haven't had one issue with it.
If it was lighter I wouldn't look for another one.

It works really good with my CG BP.

Sent from my SAMSUNG-SGH-I747 using AG Online
 
I had that HF buffer and i Sh** canned it. I hated using it because it was so heavy. I also have the PC DA and i dont really have any vibration. I mean theres some when its at max RPM but not unbearable.

EDIT: Nvm. I guess i should have clicked the link first. My HF buffer was much bigger and weighed like 10 lbs. Doesnt seem like much but when youre trying to hold it up for an hour+ it felt like 300lbs
 
Back
Top