Has anyone used...

ok that works, thanks sooo much for all your help guys!

Setec, would it be possible for later questions if I PM you?
 
Daven75 said:
ok that works, thanks sooo much for all your help guys!

Setec, would it be possible for later questions if I PM you?
Click to expand...

It's always better to ask questions in the open forum as it helps other people as well. You'll be fine with those products and the truck will look much better after...you may just have sore arms.
 
lol, true; cool, works for me, and I dont mind sore arms, I'll probably do the whole truck in either a two day ordeal or a one day kill it all kinda thing lol. For the polish, any tips? Like techniques?
 
Oh, and one last question. What kind of applicator would you recommend for applying the polish and wax?
 
It was. For the polish just a simple applicator pad, nothing special?
 
According to Mother's marketers: You’ll be glad you got into the "Gold-rush".

I don't recall that one....

08100 is our California Gold Micro-Polishing Glaze. It's a glaze with a very fine polish to promote even application and adhesion. It is NOT a sealant. It's the second step of our 3 step Ultimate Wax System. Step 1 is Pure Polish and Step 3 is the California Gold Pure Carnauba Wax, either paste or liquid. Pure in this sense means it does not contain cleaners.

As for hand application of a product like this, I'd suggest a foam pad, and removing with quality microfibers. Keep in mind glazes like this don't provide protection, so you'll want to use a wax afterwards - a wax without any cleaners in it.
 
Daven75 said:
Ski, I'll have to look into duragloss.I have a napa right down the street from me.

Setec- Target has nothing by me and walmat has minimal stuff sadly.

I'm just looking for a decent sealer, something cheap, its just for my GF's car. I'm out of sealer so yea.
Click to expand...


If you have wall mart look for surf city sealer and glaze, locally here in tx I found it on the close out shelf for 6bucks for each. tested it on my bike and its pretty nice
 
also for the sake of your arms you might want to look up the Harbor freight DA thread. If your just applying coatings and not trying to get rid of swirls, and do full corrections,, a cheap applicator that will save your arms is the turtle wax 5 inch da at wall mart. they have the foam and micro fiber bonnets for it. NOt really for corrections but it will save your arms. I had good results with it before I became obsessed and a geek. LOLOL
 
You must log in or register to reply here.
Back
Top