Heading over to the warehouse tomorrow. Need suggestion for one-step to pickup

Hyper Polish is a 1 step? I was sure it was a finishing polish. I got to try Optimum's polishes at some point.

On softer paint I can sometimes use it with a Tangerine Hydro-Tech or Yellow Rupes for a great 1 step. If you haven’t tried it, you’re missing out.
 
You will be fine with Sonax Perfect Finish. It's basicly the same with a little different polishing oils I think. Just remember with DAT polishes to work them enough and also don't overwork them either. They are quite fast working too. So to get the most out of the cut. I dabb the polish out so you get unworked polish when you start to polish. If you spread it out do so fast on the lowest speed setting. I just dabb it out and then start to polish.
 
Essence is really picky about conditions you work in. If you work outside, don't work it long or it will turn into glue and get unremovable from the panel. If you work inside a garage, some people like it for light correction with a polishing pad. Personally, I only use it as a glaze prior to coating. So finishing pad, 1 medium pass, 1 fast pass and 1 super fast pass. It does make the paint shine quite a lot.

Heard corrects nice with MF pad. Will do test spot. If not will try Adams polish and then clear cut going least aggressive to aggressive in pads. I have boss yellows LC ccs greens LC ccs orange and B&S finishing MF’s. 6 of each. Do you think the boss yellows will work for finishing with essence if I correct with one of the other polished? Also I’ve read only need one/two pads for finishing?


Sent from my iPhone using Tapatalk
 
Back
Top