Hello Everyone!

[livetodrive]

My name is Kumar ( a newbie to detailing) and sincerely appreciate the knowledge i can access from AGO.
I have reading several topics and decided to use the following products for the first time.

Please do help me to advise if the sequence and different brands will give the desired result
A: Meguiar Clay Kit to clay. Never has the car been flayed; it is a 2011 model
B. Meguiar Swirlx to remove those moderate swirl
C. Collinite 840 pre wax cleaner
D. Collinite 845

I am a bit confused ( being a newbie) if the sequence is correct or B and C need to be interchanged

 

[4u2nvinmtl]

Welcome to AGO. Your order is correct, but I don't think you need Collinite 840. An IPA (isopropyl alcohol watered down) wi[se down, should work fine as a Collinite 840 replacement. I'm also not familiar with Swirlx by Meg's so I'd recommend the more traditional M101/M105 compounds by megs or Ultimate Compound, and a final polish like Megs M205.

 

[Bunky]

Welcome !!

If you do B you do not need to do C.

 

[Kamakaz1961]

Welcome to AGO!! No need for the 840 IMO. Remember to apply 845 very thin!! If it is too thick you will have difficulty removing it! Other then that 845 is awesome stuff.

 

[Mike@DedicatedPerfection]

Welcome to AutoGeekOnline!

 

[sproketser]

Welcome aboard !

 

[GS2011]

:welcome:

 

[livetodrive]

Welcome to AGO. Your order is correct, but I don't think you need Collinite 840. An IPA (isopropyl alcohol watered down) wi[se down, should work fine as a Collinite 840 replacement. I'm also not familiar with Swirlx by Meg's so I'd recommend the more traditional M101/M105 compounds by megs or Ultimate Compound, and a final polish like Megs M205.

Thanks for the tips.
Should I be taking any precaution(s) while using Ultimate Compound ?

 

[livetodrive]

Welcome !!

If you do B you do not need to do C.

Noted with thanks

 

[livetodrive]

Welcome to AGO!! No need for the 840 IMO. Remember to apply 845 very thin!! If it is too thick you will have difficulty removing it! Other then that 845 is awesome stuff.

Will do

 

[4u2nvinmtl]

Thanks for the tips.
Should I be taking any precaution(s) while using Ultimate Compound?

Yeah, make sure you don't get it on the textured plastic trim or in any cracks or it will stain the trim and dry in the cracks.

Other than that you shouldn't have to worry about using Ultimate Compound on your paint.