Help Me Decide On Which New Toy To Get

B

Blackdevil77

New member
Joined
Jul 21, 2016
Messages
149
Reaction score
0
I have a Flex 3401 (which I like very much) but have been wanting to get my hands on a Rupes LHR21 MarkII. I've read and heard a lot of great things about that machine. I also would like to try a rotary polisher and have been looking at either the Makita 9227C or the Flex PE14. I was dead set on getting the Rupes unit, but when I think that I already have a DA polisher, I start to think it would probably make more sense to get the rotary. I know what the risks are with a rotary polisher. I have guinea pig cars I can play with to get comfortable with a machine, product or procedure before I use it on a car that matters. What would you guys recommend if you had to choose one (for now)? What are the pros and cons to each when compared to each other? Can you really compound/polish significantly faster with a rotary?
 
if you're looking into a long throw DA, take a look at the BOSS G21...
Griots Garage BOSS G21 Long Throw Orbital Polisher
griots-garage-boss-g21-long-throw-orbital-polisher-1.gif

 
Blackdevil77 said:
I have a Flex 3401 (which I like very much) but have been wanting to get my hands on a Rupes LHR21 MarkII. I've read and heard a lot of great things about that machine. I also would like to try a rotary polisher and have been looking at either the Makita 9227C or the Flex PE14. I was dead set on getting the Rupes unit, but when I think that I already have a DA polisher, I start to think it would probably make more sense to get the rotary. I know what the risks are with a rotary polisher. I have guinea pig cars I can play with to get comfortable with a machine, product or procedure before I use it on a car that matters. What would you guys recommend if you had to choose one (for now)? What are the pros and cons to each when compared to each other? Can you really compound/polish significantly faster with a rotary?
Click to expand...
Yes if your experienced in finishing down with a rotary.But your still doing more work .cut polishing and jeweling polish.Stick with the 3401 less work no halograms.Rotary is great for dampsanding.
 
VISITOR said:
if you're looking into a long throw DA, take a look at the BOSS G21...
Griots Garage BOSS G21 Long Throw Orbital Polisher
griots-garage-boss-g21-long-throw-orbital-polisher-1.gif

Click to expand...

That looks like a great machine as well. I tried looking for comparisons between that and the LHR21 MarkII but all I could find is comparisons between the G21 and the LHR21ES. They both seem more similar than different. They're even close enough in price that it makes choosing one over the other more difficult.

GSKR said:
Yes if your experienced in finishing down with a rotary.But your still doing more work .cut polishing and jeweling polish.Stick with the 3401 less work no halograms.Rotary is great for dampsanding.
Click to expand...

I was thinking about using a rotary for the compounding stage (if a heavy cut compound is needed) then refining everything with the DA and a polish. I was assuming a rotary would cut the time of the compounding step in half.
 
With the 3401 and forced rotation I personally don't see any advantage of getting a rotary. But then again, I'll never buy a rotrary and I don't have or want a 3401 either.

I have Rupes Mini, Duetto, LHR15, Griot's G21, GG6 and a Flex PE-8(which I pretty much hate)

And here's my reasoning why:

I did this in one step with my G21 and HD Adapt. So why do more steps than necessary when you can finish down to near perfection in one step?



 
Blackdevil77 said:
They're even close enough in price that it makes choosing one over the other more difficult.
Click to expand...

WE GUARANTEE IT
Griot's Garage was built on high expectations, which is why everything we sell is covered by a 100% Satisfaction Guarantee and Lifetime Guarantee against defect. We strive for perfection in everything we do so you always... Have fun in your garage!®

header_different_3.png
 
Here's the results of a rotary in the wrong hands. This was a brand new Lexus IS F Sport 350 I saw all hacked up in the grocery store parking lot a year or so ago and it was a lot worse in person than you can tell in these pictures.





And my GC that same day in the grocery parking lot:

 
custmsprty said:
Here's the results of a rotary in the wrong hands. This was a brand new Lexus IS F Sport 350 I saw all hacked up in the gorcery store parking lot a year or so ago and it was a lot worse in person than you can tell in these pictures.





And my GC that same day in the grocery parking lot:

Click to expand...

Ouch, I can see the buffer trails in the pic. This happened to my mothers car when she took it to a "detailer" at a car wash years ago. You definitely have to know what you're doing with a rotary polisher.
 
Should be a crime when you destroy someone property like that.
 
I would say a 15 mm DA machine, rupes or Flex or Groit's. I have heard they are easier to finish down with for a novice (like my self)
 
trashmanssd said:
I would say a 15 mm DA machine, rupes or Flex or Groit's. I have heard they are easier to finish down with for a novice (like my self)
Click to expand...

I have the G21 and run both a 5" bp and a 6", I like the fact you can do that. On the Z I used a 5" bp for that correction with 5.5" pads.
 
I see this at least 3 x a week on I95 in the morning.Nothing severe like that Lexus,but a couple of panels.That car was probably in a Bodyshop where a tech used caveman compound and a dirty dusty wool pad that has been on the floor for weeks.
 
You must log in or register to reply here.
Back
Top