Hi!! noob needs help

Spaniard

New member
Joined
Jul 1, 2008
Messages
10
Reaction score
0
Hi guys!!

I wanted to join this forum a long time ago since I've learned a lot from reading the threads, well I finally have some money to buy a PC and some products, so Id like some of your help :D

Here's what I already have and what Id like to buy:



(have)Meguiar's Clay bar kit

(have)Meguiar's SractX.. id like to change it for (buy)Poorboy's SSR1(Application: White polishing pad?)

(buy)Poorboy's SRR2.5.. for moderate swirls and polish(Application: Orange polishing pad?)

(buy)Poorboys EX sealant with carnuba... for a deep and durable look(Application: Gray Finishing pad?)

(have)Mothers back to black.. for black trim and tires


I think I made a mess up there, but I hope you can help me..
 
Hi guys!!

I wanted to join this forum a long time ago since I've learned a lot from reading the threads, well I finally have some money to buy a PC and some products, so Id like some of your help :D

Here's what I already have and what Id like to buy:



(have)Meguiar's Clay bar kit

(have)Meguiar's SractX.. id like to change it for (buy)Poorboy's SSR1(Application: White polishing pad?)

(buy)Poorboy's SRR2.5.. for moderate swirls and polish(Application: Orange polishing pad?)

(buy)Poorboys EX sealant with carnuba... for a deep and durable look(Application: Gray Finishing pad?)

(have)Mothers back to black.. for black trim and tires


I think I made a mess up there, but I hope you can help me..
I think your going to need SRR1 to finish down the 2.5
 
BTW you might want to check out the 4" pads with backing plate. Works awesome on the pc.
 
BTW you might want to check out the 4" pads with backing plate. Works awesome on the pc.

Thanks, I'll look into those =)..



I have another question though, after I apply the swirl remover(SRR1/SRR2), do I just wax with the Ex sealant and carnuba? , or am i missing a step?
 
Last edited:
Thanks, I'll look into those =)..



I have another question though, after I apply the swirl remover(SRR1/SRR2), do I just wax with the Ex sealant and carnuba? , or am i missing a step?
After polishing with SRR1 with a white pad, go over with a grey, blue, or red pad to burnish the finish. This extra step will give you that extra pop before LSP. Good Luck and let us know how it came out. We all love pictures.
 
After polishing with SRR1 with a white pad, go over with a grey, blue, or red pad to burnish the finish. This extra step will give you that extra pop before LSP. Good Luck and let us know how it came out. We all love pictures.

Thanks for all the help Rsurfer!!, Ill make sure to post lots of pics when Im done =)!!
 
Back
Top