Honda Pilot Full Exterior/Interior w/Cquartz Leather

nezff

New member
Joined
Mar 20, 2013
Messages
436
Reaction score
0
This was done for a local teacher and cupcake shop owner. This is the second time I have done her vehicle.
Interior consisted of Megs APC+ 10:1, air compressor pencil tip, and MF towels. No major dirt or debris was present. Leather was cleaned also with Megs APC+ 10:1 for the application of Cquartz coating.
Exterior was done with Pinnacle Rinseless. Bugs and tar removed with DP Roadkill. Tires, wells, and wheels cleaned with Amazing Roll Off, Mothers brushes, and Daytona wheel brush. Wells and wheels were dressed with Hyper dressing 1:1.
Interior dressed with Blackfire Interior Protectant. Seats have Cquartz on them.
1969163_10203301902178590_1441006607_n.jpg

10014558_10203301904058637_1157826138_n.jpg

1932455_10203301905178665_124840776_n.jpg

10150628_10203301908578750_855680442_n.jpg

1981897_10203301910938809_1154895520_n.jpg

1609952_10203301913698878_1985508821_n.jpg

1975181_10203301919899033_2090500775_n.jpg

999966_10203301920579050_58285984_n.jpg

1911693_10203301922019086_1681511817_n.jpg

1939954_10203301921699078_589572358_n.jpg

1969145_10203301936819456_1747928179_n.jpg

10154376_10203301940259542_985857935_n.jpg

1554505_10203301943779630_1090823085_n.jpg

1982329_10203301945539674_1058635727_n.jpg

1383498_10203301947659727_1486003018_n.jpg

10155986_10203301949139764_932708280_n.jpg

10014566_10203301950259792_614572137_n.jpg

1609563_10203301952179840_1354517044_n.jpg

1526687_10203301955179915_303891761_n.jpg

1011602_10203301955739929_1167581210_n.jpg

1510902_10203301966100188_73977148_n.jpg

1480702_10203301967500223_1994706718_n.jpg

1383236_10203301969580275_784850969_n.jpg

1601238_10203301969980285_973879739_n.jpg
 
Nicely done!
Did you simply use a MF with the APC at 10:1 and how do you like the Cquartz Fabric\Leather? I'm debating on offering this as an upgrade rather than the UIG+ that I use for interior and leather as a basic protection and Leatherique as an upgrade at the moment.
Also, on cloth and carpet, I use 303 Fabric guard as a basic protection and thinking of moving to the Cquartz. What are your thoughts if you don't mind and what is your upcharge for adding this protection?
 
Nicely done!
Did you simply use a MF with the APC at 10:1 and how do you like the Cquartz FabricLeather? I'm debating on offering this as an upgrade rather than the UIG+ that I use for interior and leather as a basic protection and Leatherique as an upgrade at the moment.
Also, on cloth and carpet, I use 303 Fabric guard as a basic protection and thinking of moving to the Cquartz. What are your thoughts if you don't mind and what is your upcharge for adding this protection?

I started offering Cquartz Fabric and Leather months back. I had a lot of soccer moms definitely wanting it. They all contacted me within the hour as soon as I posted it on facebook showing how it protected a customers cloth seat. (he wanted to be the guinea pig) It is fairly easy to use on cloth. With leather, you need to spray the seat somewhat liberally. Let it sit 1 minute. Lightly wipe excess off. I noticed that you can spray the seat and lightly wipe it in with a foam applicator to remove any high spots. It will dry tacky, then fully dry within 4-12 hours. It helps if you dry it with a heat gun or hairdryer. I used the sun and seat warmers.

I used megs apc in a spray bottle applying it in the cracks and crevices. I blow it out and wipe up excess with MF towel.
 
I started offering Cquartz Fabric and Leather months back. I had a lot of soccer moms definitely wanting it. They all contacted me within the hour as soon as I posted it on facebook showing how it protected a customers cloth seat. (he wanted to be the guinea pig) It is fairly easy to use on cloth. With leather, you need to spray the seat somewhat liberally. Let it sit 1 minute. Lightly wipe excess off. I noticed that you can spray the seat and lightly wipe it in with a foam applicator to remove any high spots. It will dry tacky, then fully dry within 4-12 hours. It helps if you dry it with a heat gun or hairdryer. I used the sun and seat warmers.

I used megs apc in a spray bottle applying it in the cracks and crevices. I blow it out and wipe up excess with MF towel.

Ah, very good way to introduce and gain some more clients! Thanks for the tips for installation!
I'm waiting for a rep to contact me about another product then I'll decide between the two for more of a premium interior protection.
 
Ah, very good way to introduce and gain some more clients! Thanks for the tips for installation!
I'm waiting for a rep to contact me about another product then I'll decide between the two for more of a premium interior protection.

no problem. Before you decide, inbox me. I get stuff from Carpro(corey) wink wink
 
Very nice turnaround on that Pilot! Looks great!

thanks Mike.

I had the other owner of that same shop schedule me for this Sunday. :dblthumb2:
 
Also, on cloth and carpet, I use 303 Fabric guard as a basic protection

I use 303 on carpets when the customer doesn't want the Cquartz charge.
 
Back
Top