How do I know polish is broken down when using the PC?

T

TSIFREAK

New member
Joined
Jul 24, 2008
Messages
43
Reaction score
0
I have never used the PC 7424 and would like any tips you guys could give me.
Mainly is how do you know the polish is broken down when polishing and how big of an area do I want to concentrate on? Half the hood? 1/4 hood for example. Thanks guys.
 
Do a 2'X2' section at a time. Run your pc slowly over the paint (2" per sec.) When the polish turns transparent it should be broken down. This usually takes 4-5 minutes using a pc on speed 6. Every polish reacts differently to the temperture, humidity etc.
 
Rsurfer said:
Do a 2'X2' section at a time. Run your pc slowly over the paint (2" per sec.) When the polish turns transparent it should be broken down. This usually takes 4-5 minutes using a pc on speed 6. Every polish reacts differently to the temperture, humidity etc.
Click to expand...

:iagree: and another trick is to look through the polish. Hard to discribe. It should go from looking like a paste to a talc that you can see corrected paint through. Another that I use if I don't have just the right light on the polish is a swipe with my finger. If it goes from a smear to a clear swipe through haze (talc) it is broken down.
 
TSIFREAK said:
I have never used the PC 7424 and would like any tips you guys could give me.
Mainly is how do you know the polish is broken down when polishing and how big of an area do I want to concentrate on? Half the hood? 1/4 hood for example. Thanks guys.
Click to expand...


Here check this site out and watch the videos he shows you what some polishes look like when broken down and other very informative tips for PC useage Paintcare & Detailing - Enthusiasts guide to detailing
 
Jimmie said:
:iagree: and another trick is to look through the polish. Hard to discribe. It should go from looking like a paste to a talc that you can see corrected paint through. Another that I use if I don't have just the right light on the polish is a swipe with my finger. If it goes from a smear to a clear swipe through haze (talc) it is broken down.
Click to expand...


:iagree:

when the paste starts to powder or looks as if the wetness is gone the polish has flashed and broken down and ready for buffing.
 
I'll add that Optimum is the exception as you can work that stuff like a beotch and not flash lol.
 
I will agree with Surfer (Surfer write this down, since it doesn't happen often :D) depending on the polish, you will see something different when they brake down. Some polishes don't really dust, just depends on what you are using. If you are looking for a specific polish and what it looks like when broken down, we can be very specific for that.
 
The polish I will be using is poorboys SSR2 & SSR1
 
Last edited:
TSIFREAK said:
The polish I will be using is poorboys SS1
Click to expand...

I use this is as well, and before I knew when to stop, I would just pull the buffer off and wipe a little bit of the polish off to see what the paint looked like. Then I kept going and it started to look like baby powder coming off the buffer.

It's ok to stop early and need to keep buffing, but you don't wanna dry buff.
 
Meghan said:
I will agree with Surfer (Surfer write this down, since it doesn't happen often :D) depending on the polish, you will see something different when they brake down. Some polishes don't really dust, just depends on what you are using. If you are looking for a specific polish and what it looks like when broken down, we can be very specific for that.
Click to expand...
I own you :D
 
You must log in or register to reply here.
Back
Top