How to use clay towel with out acessable hose?

94LT1

94LT1

New member
Joined
Mar 29, 2008
Messages
537
Reaction score
0
With winter here in pittsburgh I have a 2 car garage but its tight and I dont have a drain in the floor.i have acess to a spray/wash car wash and i bring 2 buckets with gamma seal lids with soap and wash mit which I use for heavily soild cars and once i bring it home I go back over the car with ONR rinseless wash. I really enjoy claying with the clay towel because of the time savings but I dont know what else I could do to remove contaminates from the towel before using it on the next panel.any recommendations?
 
Um...dunk it in a bucket of ONR? Bring it inside and wash it off in the sink?
 
I do not clean my Speedy Prep Towel unless I drop it
 
Setec Astronomy said:
Um...dunk it in a bucket of ONR? Bring it inside and wash it off in the sink?
Click to expand...

The vehicle is rinseless washed inside my garage.i didnt no if just dunking the towel would be enough to remove contaminants?
 
Anyone have experience with using a clay towel with out a hose?
 
Oh, I just wipe it down in a bucket of water. I thought that's all that's required
 
94LT1 said:
Anyone have experience with using a clay towel with out a hose?
Click to expand...

i dont use a clay towel as the towels i have used seem to cause alot of marring on the paint i have and still use the nano skin autoscrub mitt it seems like the same but i havent had that much marring on the paint as with the other products on the market as far as keeping it clean i normally wash it off every now and then i use blackfire clay cleaner and extender when you use it i do not use alot maybe 2 sprays on the mitt or towel work it in quickly and rinse it off quickly good luck
 
I have the nano skin sponges. I don't know the difference between that and clay towel
 
Flex3k said:
i dont use a clay towel as the towels i have used seem to cause alot of marring on the paint i have and still use the nano skin autoscrub mitt it seems like the same but i havent had that much marring on the paint as with the other products on the market as far as keeping it clean i normally wash it off every now and then i use blackfire clay cleaner and extender when you use it i do not use alot maybe 2 sprays on the mitt or towel work it in quickly and rinse it off quickly good luck
Click to expand...

The clay towel is made by speedy prep.it save time and I use it before polishing so marring the paint isnt that much of a concern.i am more worried about removing contaminants with the towel.so dunking the towel in a bucket water after each panel should be enough?
 
I use the Nano Clay sponges. I usually just keep dipping the sponge in the ONR water to keep the surface wet. I keep a MF handy to keep from all the ONR water from dripping on the floor. I 'imagine' your towel could function the same way.
 
You must log in or register to reply here.
Back
Top