I think Im "done" with sealants... Any TRUE alternatives?

MrOneEyedBoh said:
Like there is always a part in my kind that I didn't polish the paint correctly, I didn't prep wipe fully, I didn't apply enough coating... Yeah I'm that kinda of guy

Sent from my SM-G781V using Tapatalk
Click to expand...

Polish until you think it looks good. Simple as that.

Overthinking is what leads to install problems.
 
Coming back to the two I suggested, is ease of use. No more difficult than a good detailer spray.

I could practically do an entire vehicle blindfolded, remove the blindfold after I was done and all would look good.

Trick with either, don't over-apply.
 
I'm not a "coating guy" either.

But, I have used them (Thanks, Guz!)

It's really all about paying attention to detail. And well, if you can't do that....... then what in the hell are you doing on AGO? Lol

I believe the companies that sell these products (coatings) are fully aware of the trepidation that most people have, and have addressed these concerns in the past few years to make it as simple as could be. And they have succeeded IMO

If you are "done with sealants and waxes", then you need to move into the coating camp.
 
sio2 spray toppers. Griots Garage 3-1 and Shine Supply Clutch are two i’ve liked and used. Can be used on all surfaces.

Wipe on buff off and done.

If you don’t mind dropping a dime or two I love Polish Angel products

Another one that is popular is Wolfgang silica spray.

These are basically ceramic sealants but don’t stain


Sent from my iPhone using Tapatalk
 
Carpro lite is simple to use. Much like a sealant. Just add some toppers to it. Gyeon has a new wax for instance.

And polish angel cosmic V2 applies like a sealant but acts like a ceramic.

None stain. Not sure of the gyeon wax though.
 
MarkD51 said:
Coming back to the two I suggested, is ease of use. No more difficult than a good detailer spray.

I could practically do an entire vehicle blindfolded, remove the blindfold after I was done and all would look good.

Trick with either, don't over-apply.
Click to expand...
Understood, but doesn't he paint have to be polished Everytime before using it? Since it's a coating in a sense.

Sent from my SM-G781V using Tapatalk
 
The Guz said:
Polish until you think it looks good. Simple as that.

Overthinking is what leads to install problems.
Click to expand...

What I mean is , did I polish the surface enough to have it clean enough for bonding. Not for swirl elimination.
 
MrOneEyedBoh said:
What I mean is , did I polish the surface enough to have it clean enough for bonding. Not for swirl elimination.
Click to expand...

It’s not rocket science lol. Polishing is going to clean up paint even if you did it by hand.

If you are already polishing and waxing or sealant then your 3/4’s of the way there for prep.

Get yourself some Cquartz Lite as it’s wipe on wipe off. Has a 4 hour cure time. Top it with Reload to protect for the first week.

You can use the coating on trim, glass (non-wiper use), wheels and the list goes on.
 
The Guz said:
It’s not rocket science lol. Polishing is going to clean up paint even if you did it by hand.

If you are already polishing and waxing or sealant then your 3/4’s of the way there for prep.

Get yourself some Cquartz Lite as it’s wipe on wipe off. Has a 4 hour cure time. Top it with Reload to protect for the first week.

You can use the coating on trim, glass (non-wiper use), wheels and the list goes on.
Click to expand...

Trust me I get it, but you have to say some people on here make it out to be rocket science. If prep isnt right blah blah and so on. It obviously weirded me out lol
 
These are a couple quotes I live by. Got to get out there and just do it.

fdceded0fea7896686b225ccd48a520d.jpg


0340482111b05075068a527f514b574e.jpg
 
MrOneEyedBoh said:
Just looked it up. What's the application like?

Sent from my SM-G781V using Tapatalk
Click to expand...

I’ve got a thread on Autopia comparing it to another product.

Application is easy for a wax. Application is easy. Needs to sit 30 mins. Wipe off a tic sticky compared to my spray and wipes but no issues. Great stuff


Sent from my iPhone using Tapatalk
 
I’ve gone back from coating to my old standard FK1000P, spring clean with 3D speed done deal.
 
You must log in or register to reply here.
Back
Top