I want a 1-step polish. I.e: xmt 360.

C

cobraa

New member
Joined
Mar 6, 2009
Messages
785
Reaction score
0
Hey guys,

I would like to buy some all-in one polish for customer's car that doesn't want to pay or just want a QUICK detail to sell the car. Instead of using SSR2, then having to deal with some hologram on dark-colored car ( sometimes) and then waxing the car.

I'm currenctly using Malco rejunavator for those quick job but I think it's more a glaze/filler. But I love how easy it's too apply and very slick. I can only think about 2 products; XMT 360 and Opti-seal. Is there anything else?


I would like a product that finish slick and glossy, that can remove a bit of swirls and contains wax or sealant so I don,t need to wax the car after.

Thanks for the tips!:props:
 
I like D151 if its a really damaged finish. It has the most cut out of all the AIO's out there and leaves behind decent protection. My personal favorite is optimum poli-seal. Good correction and leaves a really slick finish behind. I also have XMT 360. It works well,but is pretty pricey compared to the other AIO's out there.
 
ive had great results with poorboys polish with sealant...PWS.......slick and glossy finishes up well
 
I can vouch for both Poorboy's PwS and XMT 360, both are great products to do what your looking for. I'd really like to try D151 and Poly-seal...
 
You should still follow up with a coat of wax because the amount that's in the AIO's is not enough for real protection. Sure they will get by for a very short period, but do you really want that hanging over your head? It's not that difficult to add a layer after your AIO session.
 
:iagree: and these polishes provide a great base for a nice Carnauba IMO.
 
Poli-Seal with a polishing pad, followed by Optimum Car Wax.
 
hey guys,

PB polish with sealant doesnt have any abrasive. I prefer something with a bit of cut. Just so I can say that some swirls were polished.
 
You must log in or register to reply here.
Back
Top