Incorporating left over Z-2, Z-5 & Z-6

[hofiveo]

I got the fever and ordered about $1100.00, with the help of AGO and DI. I will use the Z-2 on one white 2001 F350 and the Z-5 on a dark grey mettalic 2004 Acura TL. I have the Flex 3401(waiting to use) Meqs 105/205, Menzerna Polymer Sealant and DP MaxWax Combo. Where would you guys layer in the Zaino Products? Thanks for any help.:hungry:Feed back please:dblthumb2:

 

[5.4 Shelby]

Where would you guys layer in the Zaino Products?

ebay.


j/k. I dont use their products so I am not sure where you would use them. What did you buy from AG? You may not need the Zaino stuff.

 

[ScottB]

Z6 is a spray and could be used on most waxes and sealants without issues. Their other products are sealants and are quite the same in design as the Mernzerna Powerlock Sealant.

 

[hofiveo]

5.4 Shelby, what I have is in the OP. I have been using Z for about 7 years. Looks great, easy on & easy off and lasts a long time. I am new to this polishing(detailing) skill and products and what they do and used for. I always would allow a Prof. detailer to get rid off swirls and such and I would apply the Zaino by hand or wax spreader. I have some left and want to get rid of it and use the stuff I bought from AG and DI.
So if they are sealants similar to Menzerna power lock sealant, I think I will apply The menzerna first then apply two coats of Z-2 with Z-6 before Menzerna and after, and in between coats of Z-2. Yeah I did not know they were considered sealants, Thank You for the info Killer.

 

[5.4 Shelby]

5.4 Shelby, what I have is in the OP.

Duh. I guess I shoulda read a little closer.

I think you will like your new toys so much, you will forget about the Zaino. Have fun with them.

 

[hofiveo]

Yeah, with todays technology my head swims alot too. So much to learn. If you search other threads i started you ll see what i am up against, but i am a Geeek when it comes to cars, another aspect of cars is now in my memory bank. Thanks

 

[rohnramirez]

Yeah, both z2 & z5 are sealants, idk why zaino would label them as polish. nonetheless, if i were you, here's how i'd do it:

-zaino z5 with zfx using z6 to remove the residue
-zaino z2 2coats with zfx using z6 between coats as well
-then top it DPMW

or

-menzerna polymer
-top with DPMW 2x

I think Zaino protects better compared to Menz, but i haven't tried it, so i don't know how it looks either. If you insist on using everything.

-zaino z5 with zfx using z6 to remove the residue
-zaino z2 1coat with zfx using z6 to remove the residue
-Menz
-then top it DPMW

Good luck!