Infiiniti G37 2 Step Paint Correction.

[Colosoccer15]

Hello Every one, This is my very first post so please bear with me if there are any mistakes. My cousin and I decided to bring back the shine in his car so we decided to tackle this project together. Overall it took us about 7 hours to tackle this bad boy. We only did paint correction.

Materials Used:

Porter Cable 7424
Meguiar's Gold Class Car Wash
Meguiar's Clay Bar
Meguiar's Quik Detail Spray
Meguiar's M105
Meguir's M205
Wolfgang Deep Gloss Paint Sealant
Lake County CCS Pads (Yellow, White, Black)

We started by washing the Vehicle thouroughly and rinsing it. While the vehicle was wet we went ahead and clayed the car since it had concrete and paint overspray along with other Bonded Contaminants that just made the car feel Horribly grainy. once it was clayed we washed and dried again and we began by working M105 to remove the heavy swirls and scratches that the paint had, and followed it up with M205 to refine the finish and bring out the gloss. Once we finished we did an IPA wipedown and applied Wolfgang Deep gloss Paint Sealant 3.0 to Protect this Bad Boy for a while.

Here are a few pictures of before and after. Note that some areas were not corrected since it had Clear Bra on it (Front Bumper)


View attachment 15562

View attachment 15563

View attachment 15564

View attachment 15565

View attachment 15566

View attachment 15567

View attachment 15568



Here are the Few after pics and I apologize for the lack of pics, we were running out of time and sun.

View attachment 15569

View attachment 15571

View attachment 15574

View attachment 15575

View attachment 15576

View attachment 15578

View attachment 15579

View attachment 15580

End Result........Great Success!!!!!Im the MAN

 

[cardaddy]

Nice turnaround!
Can't stand to see a dirty "G".

 

[JSou]

Glossy. Nice job.

 

[tchoke]

i got same car and will be battling some swirls and scratches
what pad did you use with the 105?

 

[Colosoccer15]

i got same car and will be battling some swirls and scratches
what pad did you use with the 105?

Yeah, I started using a yellow foam ccs cutting pad with m105. Buy I was battling the sun all day. My cousin rigged a tent for me and even then the product would dry and dust. I had to keep it primed with a squirt of water and keeping the work area small. It's a finicky product, but it works like magic

 

[Colosoccer15]

Thanks, it was worth the back pain :buffing:

Glossy. Nice job.

 

[Colosoccer15]

Nice turnaround!
Can't stand to see a dirty "G".

Lol, yeah it was in bad shape. It's not perfect, but its a great improvement over what it was before the correction[/QUOTE]