Klasse Act
Well-known member
- Feb 21, 2012
- 27,705
- 2,735
Love their under carriage spray and have been using it for over a decade!
Sent from my LGLS990 using Tapatalk
Sent from my LGLS990 using Tapatalk
Inside Griot's Garage
- Thread starter VISITOR
- Start date
LSNAutoDetailing
Active member
- Jun 21, 2014
- 3,373
- 21
I've been looking at these lights. Pricey... once you add up all the required accessories. 7 hrs on low 2 hrs on high.
I'm currently not happy with my Husky LED lights, but don't wanna go down the DYI Zach rout.
Sent from my iPhone using Autogeekonline mobile app
Paul- first of all, a belated welcome to AZ. We're on the tail end of the summer heat (hopefully!)
I have the original version of the DIY Zach build. More than happy to let you try it out to see if you have any interest in building one. I gave away my Dual Halogen light as I got tired of suffering multiple heat strokes from it!
Hope you are doing well getting settled in . talk to you later.
ted
LSNAutoDetailing
Active member
- Jun 21, 2014
- 3,373
- 21
Interesting factoid listed as a Q/A on the GG website on the lights:
I really like these lights and am deciding on what the configuration should be. I was thinking small/large/small on one light bar.
My biggest issue with my current lights and tripod set-up is the dang extension cords. One trip on the tripod or cords and things get bad...
Any thoughts?
I really like these lights and am deciding on what the configuration should be. I was thinking small/large/small on one light bar.
My biggest issue with my current lights and tripod set-up is the dang extension cords. One trip on the tripod or cords and things get bad...
Any thoughts?
Klasse Act
Well-known member
- Feb 21, 2012
- 27,705
- 2,735
Whenever I place another order I'm getting some of this!
Sent from my LGLS990 using Tapatalk
Sent from my LGLS990 using Tapatalk
RaskyR1
New member
- Apr 14, 2008
- 3,733
- 0
The timing of you posting this product is hilarious as it saved me a lot of time and headache last weekend!!!
VISITOR
Active member
- May 10, 2007
- 9,859
- 3
- Thread starter
- #91
i already have that 2" BOSS DA backing plate but i want those 2" pads! looks like a perfect fit for the GG3!
Griots Garage BOSS Air 2 inch Backing Plate
Griot's Garage BOSS Air 2 inch Backing Plate can also be used with the 3 inch Griots Garage Random Orbital Polisher and can help you get into tight spaces like bumpers, trim and complex body panels for an all over perfect paint job. The balanced aluminum hub provides a long service life and smooth operation.
Griots Garage BOSS Air 2 inch Backing Plate
Griot's Garage BOSS Air 2 inch Backing Plate can also be used with the 3 inch Griots Garage Random Orbital Polisher and can help you get into tight spaces like bumpers, trim and complex body panels for an all over perfect paint job. The balanced aluminum hub provides a long service life and smooth operation.
oneheadlite
Well-known member
- Aug 20, 2015
- 1,795
- 100
I love this stuff! Easy off, crazy hydrophobic.
goldendodo19
New member
- Jul 1, 2013
- 638
- 0
I kind of want the gg3 now with the 2in pads.
VISITOR
Active member
- May 10, 2007
- 9,859
- 3
- Thread starter
- #97
i think this going to be a great match with the GG3 with lots/plenty of power. i just bought the 2" conversion kit which comes with one each of all the BOSS foam/microfiber pads (been waiting for this!) and 2" backing plate even though i already bought the backing plate when it first came out (same one below that comes with the 2" conversion kit). i have used the 3" FAST cutting microfiber pad (no foam interface which translates more direct energy) with the GG3 and it didn't bog down at all and cut quick on some nasty headlights. you can only imagine what a 2" backing plate and pads are gonna do. you gotta hand it to GG for listening to their customers on remedying the situation for those who said the GG3 was under powered...
Griots Garage BOSS Air 2 inch Backing Plate
goldendodo19
New member
- Jul 1, 2013
- 638
- 0
very good points. I just re acquired a rupes mini this summer and forgot how nice the rupes line of polishers were. I still love using my megs g110v2 and gg6 though. The rupes nanos are too pricey for the frequency I use them at, I think the gg3 w the backing plate would be a good compromise. Could even just get the backing plate and the pad punches and punch out my own pads.
VISITOR
Active member
- May 10, 2007
- 9,859
- 3
- Thread starter
- #100
i have been searching for a 50mm (2in.) hollow punch in a kit but most all of them are not offered with that size in it. the megs foam discs and lake country thinpros are two that i would like to make that size in. may have to break down and order the kxk 2" hollow punch...